GETTING STARTED 1
1. Getting Started
1.1 Introduction
This manual provides operation instructions and
information required to operate the SmartWeight Touch®/
GSP9200 Touch Balancer. Read and become familiar
with the contents of this manual prior to operating the
SmartWeight Touch® or the GSP9200 Touch Balancer.
The owner of the SmartWeight Touch®/GSP9200 Touch
Balancer is solely responsible for arranging technical
training. The SmartWeight Touch®/GSP9200 Touch
Balancer is to be operated only by qualified trained
technicians. Maintaining records of personnel trained is
solely the responsibility of the owner and management.
This manual assumes the technician has already been
trained in basic balancing procedures.
References
This manual assumes that you are already familiar with
the basics of tire balancing. The first section provides the
basic information needed to operate the SmartWeight
Touch®/GSP9200 Touch. The following sections contain
detailed information about equipment operation and
procedures. “Italics” are used to refer to specific parts
of this manual that provide additional information or
explanation. For example, “1.3 SmartWeight Touch®/
GSP9200 Touch Components” on page 7. These
references should be read for additional information to
the instructions being presented.
To Next Page
Loading...
