CALIBRATION AND MAINTENANCE 69
5. Calibration and
Maintenance
5.1 Calibration Procedures
eCal™ Auto-Calibration
The SmartWeight Touch®/GSP9200 Touch utilizes
eCal™ automatic calibration. Once the balancer is
calibrated at installation time, no further operator input is
required.
Calibration Procedures
Using calibration procedures, the operator can calibrate
the following systems:
• Inner Dataset
• Outer Dataset
• Load Roller
The operator can also perform a 3 Spin Balancer
Calibration and check calibration of any of the systems.
From the main balance screen, touch the “Tools” button.
Figure 306.
Touch the “Advanced” button.
Figure 307.
Touch the “Calibration Procedures” button.
Figure 308.
The main Calibration Procedures screen is displayed.
Figure 309.
To Next Page
Loading...
