EQUIPMENT INFORMATION 57
4. Equipment
Information
4.1 Tools
The Tools button contains equipment information and set
up options.
Quick Calibration Check
Quick Calibration Check allows the operator to check
balancer calibration.
From the main balance screen, touch the “Tools” button.
Figure 224.
Touch the “Quick Calibration Check” button.
Figure 225.
Install the calibration weight on the spindle faceplate and
follow the on-screen instructions.
Figure 226.
After calibration check, remove calibration weight.
Set Up
The “Set Up” screen contains a list box of balancer set up
items.
Figure 227.
To Next Page
Loading...
