EQUIPMENT INFORMATION 67
Figure 298.
Balance Bare Rim
From the main balance screen, touch the “Tools” button.
Figure 299.
Touch the “Balance Bare Rim” button.
Figure 300.
The balance screen is displayed with a bare rim. During
bare rim balancing, the load roller is disabled.
Figure 301.
Balance the rim as normal, taking dimensions, applying
weights, etc.
Touch the “print” button to print the current page.
Figure 293.
Touch “X” to return to the balancer screen.
Figure 294.
Clean Threads
From the main balance screen, touch the “Tools” button.
Figure 295.
Touch the “Clean Threads” button.
Figure 296.
The main Clean Threads Explanation screen is displayed.
Figure 297.
Follow the on-screen instructions to clean the spindle
threads.
After the spindle threads are cleaned, touch the “Exit”
button to return to the main balance screen. (Figure 298.)
To Next Page
Loading...
