HunterDouglas M25S - Limit Settings; Top Limit Setting; Bottom Limit Setting; Roofblind Setting

4
Quick Programming Instruction M25S Duette
®
/Pleated Roof Blinds (PE models)Version 1.0
11-M-02EN-V10
LIMIT SETTINGS
X
HOLD
X = Factory reset
Press and hold I or II until the blind moves (for 5 seconds)
ᆳ
off
Press and hold I or II until the blind stops by itself in top position.
Off = Normal operation
off
X
OK
X = Roofblind setting
With blind in bottom position, press I or II for 1 second IMPORTANT; Release button after 1 second
ᆲ
ᆱ
B
Press II or I until desired bottom limit is reached.
B = Bottom limit setting
A
A = Top limit setting
Blind must be down at least 200 mm before setting top limit.
Press I or II and hold until the blind stops by itself.
200 mm min.
ᆰ
11-A0093.0