What to do if the power cable of HunterDouglas Engine is damaged?
If the power cable of your HunterDouglas Engine is damaged, continued use is not possible because the power cable cannot be replaced. In this situation, you should contact technical service for assistance.
How to avoid injuries when installing HunterDouglas Engine?
To prevent serious injuries from incorrect installation of HunterDouglas Engine, carefully read the provided instructions before starting any work.
What to do if I need to dispose of HunterDouglas M40 TE Engine?
Disposal of the HunterDouglas Engine in domestic waste is strictly prohibited. Separate the waste into categories for disposal, according to the methods envisaged by current legislation in your area.
General| Displacement | 40cc |
|---|---|
| Cylinders | 1 |
| Cooling System | Air-cooled |
| Fuel System | Carburetor |
| Compression Ratio | 8.5:1 |
| Type | 4-stroke |
Crucial safety instructions for personal safety and correct installation.
Precautions and warnings for physical installation of the product.
Guidelines and warnings for safe operation and use of the automated system.
Checks before installation ensuring product suitability and compatibility with the awning.
Steps and considerations for physically assembling and installing the tubular motor unit.
Ensures correct association of control buttons with awning movements. Check wiring if incorrect.
General warnings and notes to consider before starting programming procedures.
Explanation of limit switch programming and its relation to awning positions.
Information on the maximum continuous work cycle and the thermal cut-out function.
To Next Page