Configuring multiple Hubs on one
PowerView® Network (Optional).
After a primary Hub has been paired to the PowerView® Network, each
subsequent Hub paired to the same network will automatically be
configured as a secondary Hub (network access point). Please follow in-
app instructions to install secondary Hubs.
You’re ready to use the PowerView® App.
For more information about the setup and use of the PowerView®
App, please visit:
hk.hunterdouglas.asia/systems/powerview-automation#manuals
11
Note: The LED of secondary Hubs will display solid GREEN, once paired to the
PowerView Network.
.
To Next Page
Loading...
Need help?
General
