What to do if my Hunterstoves Group Parkray ASPECT 4 has damp/rainy days lighting and burning problems?
If you are experiencing lighting and burning problems on damp or rainy days, it may be due to low flue temperature or rainwater inside the flue. Use good quality wood to start and maintain the fire, and speak to your installer about fitting a rain cowl.
Why is there creosote build-up in the chimney of my Hunterstoves Group Parkray ASPECT 4 Wood stove?
The most probable cause is wood with a moisture content over 20%. To resolve this, use dry seasoned wood (less than 20% moisture content). Also, operate the stove at a high temperature for short periods each time you use the appliance to avoid large build-ups of tars and creosotes.
Why is there low heat output from my Hunterstoves Group Parkray ASPECT 4?
The low heat output may be caused by: * Low flue draught: Speak to your installer for advice on a suitable flue system. * Wet wood (over 20% moisture content): Ensure you are using dry seasoned wood with less than 20% moisture content.
Why is there smoke and small flames in my Hunterstoves Group Parkray ASPECT 4 Wood stove?
This is most likely caused by wood with a moisture content over 20%. Make sure to use dry seasoned wood with less than 20% moisture content.
Why is the glass blackening on my Hunterstoves Group Wood stove?
Several factors can cause the glass to blacken: * Using poor quality wood: Use dry seasoned wood (less than 20% moisture content). * Low flue draught: Speak to your installer. * Incorrect use of air control: See user instructions for correct use of air control. * Appliance operated at low temperatures continuously: Operate at high output for short periods. See instructions for correct use of air control.
What to do if there is excessive smoke spillage into room when I open the door of my Hunterstoves Group Parkray ASPECT 4?
Excessive smoke spillage when opening the door could be due to: * Low flue draught: It is recommended to speak to your installer. * Incorrect additional ventilation air into the building: It is recommended to speak to your installer.
Why is there wind noise coming from my Hunterstoves Group Parkray ASPECT 4?
The most probable cause is high flue draught. It is recommended to speak to your installer.
Why are the firebricks/glass dirty in my Hunterstoves Group Parkray ASPECT 4?
Dirty firebricks or glass are often caused by wood with a moisture content over 20%. Use dry seasoned wood (less than 20% moisture content).
Why is my Hunterstoves Group Parkray ASPECT 4 producing blue/grey smoke from the chimney?
Blue/grey smoke typically indicates that the wood has a moisture content over 20%. Ensure you use dry seasoned wood with less than 20% moisture content.
Why is there excessive fuel consumption in my Hunterstoves Group Wood stove?
Excessive fuel consumption can be attributed to: * High flue draught: It is recommended to speak to your installer. * Over dry wood: Avoid using constructional timber or pallet wood.
General| Brand | Hunterstoves Group |
|---|---|
| Model | Parkray ASPECT 4 |
| Category | Wood stove |
| Nominal Heat Output | 4 kW |
| Energy Efficiency Class | A+ |
| Flue Outlet Diameter | 125 mm |
| Fuel Type | Wood |
| Weight | 60 kg |
| Defra Approved | Yes |
| Airwash System | Yes |
To Next Page