14
1. The main body itself will not work.
2. The appliance will not work if the chamber
set isn’t assembled well even though it is
on the body.
1
3
Place the control lever of the chamber set
to as image
2
If the control lever is not placed at the
chamber set and body will not fit completely.
Assemble the bottom of the chamber to
bump of the body.
If the sign <
▲
> on the body and the sign
<
▼
> behind of the chamber set are aligned
well, it is perfectly assembled.
NOTE
*The assembling method is same regardless of strainer type.
How to assemble the chamber set and body
1
1
2
3
3
2
1