HUROM H-AI Series - User Manual

02
04
06
07
08
12
14
16
18
19
22
24
Safety Precautions
Parts and Accessories
How to Disassemble Chamber
How to Prepare Ingredients
How to Assemble (Smart Hopper/Dual Hopper)
Cautions during Operation
How to Use (Smart Hopper/Dual Hopper)
How to Use Control Lever (by mode/by ingredients)
Screw Stops during Operation
How to Clean
Before Requesting for Repair
Product Specifications / Warranty
H-AI Series ( For Household Use Only / Warranty Included )
CONTENTS
Instruction Manual
TM
1. Read ‘Safety Precautions’ (p. 2) and use the appliance properly.
2. After reading the manual, keep it in a convenient location for future reference.
3. Do not use it abroad which has different power supply and voltage.
4. Any quality improvements is subject to change without notice.
Safety Precautions
Parts and Accessories
How to Disassemble Chamber
How to Prepare Ingredients
How to Assemble
Cautions during Operation
How to Use
How to Use Control Lever
When Screw Stops during Operation
How to Clean
Before Requesting for Repair
Product Specifications / Warranty

HUROM H-AI Series Specifications

General

Model	H-AI Series
Type	Slow Juicer
Motor Power	150W
Motor Speed	43 rpm
Pulp Separation	Automatic
Material	Ultem, Tritan
Warranty	10 years

Summary

Parts and Accessories

01 Smart Hopper (Hopper Cover; Mixing Bar)

Details the Smart Hopper components.

02 Dual Hopper

Details the Dual Hopper components.

How to Disassemble Chamber

Step 1: Disassemble Hopper Lid

Turn hopper lid counterclockwise, remove mixing bar, separate chamber.

Step 2: Remove Strainer Assembly

Pull up strainer with screw and spinning brush.

Step 3: Remove Screw

Hold screw wing and pull up to remove.

Step 4: Separate Brush and Strainer

Disassemble the spinning brush and strainer.

How to Prepare Ingredients

Fruit Preparation

Instructions for preparing various fruits for juicing.

Seed Fruit Preparation

Guidance on preparing fruits with seeds.

Fiber-Rich Vegetable Preparation

How to prepare fibrous vegetables.

Soft Ingredient Handling

Tips for extracting soft ingredients.

Fibrous Ingredient Preparation

How to prepare fibrous ingredients.

How to Assemble Smart Hopper

How to Assemble Dual Hopper

Step 1: Assemble Strainer and Brush

Assemble the fine strainer and spinning brush.

Step 2: Assemble Screw

Assemble the screw into the strainer assembly.

How to Use Smart Hopper

How to Use Dual Hopper

How to Use Control Lever

Screw Stoppage During Operation

Reverse Operation to Clear Jam

Turn dial to REV for 3-5 seconds to release tangled ingredients.

Resume Operation

Turn dial to ON to resume juicing after clearing jam.

How to Clean

Troubleshooting and Repair

Main Body Not Working

Check power cord and proper assembly.

Align Safety Sensors

Ensure safety sensor icons are aligned correctly.

Prepare Ingredients Properly

Unprepared ingredients may damage the product.