8
-
ping it into the appropriate seats.
-
2. CONTROL DESCRIPTION
NOTE - The meanings of the symbols on controls are explained in
the previous pages.
2.1 Dual-action switch
ups.
Press the button (2) and pull the lever (1) for start up.
WARNING - The starting of the motor causes the simultaneous ac-
tivation of the blade.
2.2 Cutting height adjustment
-
tion the wheel axis in one of the three provided slots inside the chassis.
DO THIS WHEN THE BLADE IS STOPPED.
3. GRASS CUTTING
3.1 Fastening the grass-catcher
in the illustration.
3.2 Start-up
3.3 Grass cutting
-
3.4 Emptying the grass-catcher
When the grass-catcher is too full, grass collection is no longer efficient
– release the switch lever (1) and wait for the blade to stop;
keeping it in an erect position.
3.5 When work is finished
IMPORTANT
4. ROUTINE MAINTENANCE
IMPORTANT -
-
4.1 Blade maintenance
page 2.
steps indicated in the illustration.
4.2 Cleaning the machine
-
ponents.
Do not use aggressive liquids to clean the chassis.
5. ENVIRONMENTAL PROTECTION
-
-
-
-
-
chine, hand it over to a disposal centre, in accordance with the local
regulations in force.
6. DIAGNOSTICS
What to do when…
Corrective action
1. Electric mower does not work
2. Electric mower trips the mains circuit-breakers
contact breaker is not sufficient
3. Cut grass is not blown into the gras box
The blade has received a knock Sharpen, the blade or replace it
Check the guides which direct the
grass towards the grass box
Clean the blade housing so as to
give an easier path for the grass
to the grass box
4. Mower struggles to cut grass
The blade is not in good
conditions
Sharpen the blade or replace it
To Next Page
