HURST P 630 SG - Default Chapter; Table of Contents

2
Content Page
1. Dangerclassications 4
2. Productsafety 5
3. Intendeduse 9
4. Powerunitdesignation 10
5. Functionaldescription 10
5.1 General information 10
5.2 Installation of the power unit 11
5.3 Motor 12
5.4 Valves 13
5.5 Pumps 14
5.6 Frame with side sections 14
5.7 Connection to the rescue equipment 14
6. Connectingthehoses/devices 15
6.1 Coupling the mono-couplings 15
7. Set-upandcommissioning 17
7.1 Set-up 17
7.2 Commissioning 17
8. Operation 19
8.1 Starting the engine 19
 8.2 Turningtheengineo 20
8.3 Refuelling 20
8.4 Controlling the valves 21
9. Dismantlingtheequipment/deactivationfollowingoperation 22
10.Tests 23
10.1 Recommended test intervals 23
10.2 Visual and function check 24
11.Maintenanceandrepair 25
11.1 General information 25
11.2 Service work on the hydraulic unit 26
11.3 Additional service work 28