Manufacturer: Fabryka Mebli Biurowych Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska
Distributor: Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska hushoffice.com
MAINTENANCE AND SAFETY RULES
hushhybrid * HUS-BX-020/120/220
1
GLASS ELEMENTS
Once a week, clean the surface in circular
motions using a damp cloth.
If you use a cleaner, apply it first to the cloth
and clean the surface.
To clean glazed elements, use chemical
products that are intended to clean glass and
mirrors.
2
TABLE TOP
Regularly clean the entire surface with a mi-
crofibre cloth soaked in the cleaner or water.
Allow to dry.
Do not apply the cleaner directly to the surface.
Do not use abrasive products, polishing
products and scouring pads or sponges.
3
HANDLES
Clean the handle inside and outside the booth
every day using a damp microfibre cloth. After
cleaning, wipe the handles dry.
4
VENTILATION SYSTEM
Once every six months, vacuum the fan using
a soft attachment of the vacuum cleaner.
Do not insert the hose between the fan blades.
5
CASE AND FLAT SURFACES
Once a week, clean the surface from top
to bottom with a damp microfibre cloth. Mi-
crofibre cloths do not leave fibres and prevent
streaks. If any liquid is spilled on the furniture,
wipe it immediately before it dries. Do not use
products containing abrasive agents, such as
powders, pastes and cream cleaners which can
scratch the surface. Do not use scouring pads
or sponges.
13
5
8
4
2 6
7
6
UPHOLSTERED ELEMENTS
Once every six months, vacuum the surface
of all upholstered elements (panels and seats)
from top to bottom.
For heavy soiling, use a neutral cleaner.
Before cleaning, test the cleaner on a
hidden area and follow manufacturer’s
instructions.
Use upholstery cleaners that do not
contain paraffin, alcohol or other solvents.
In the case of Wool fabric, lint and pilling occurs
over time. This is a natural process for this type
of fabric.
7
FLOOR
Once a week, vacuum the entire floor surface.
For heavy soiling, use a neutral cleaner. Use
products intended for floor coverings.
Before using the cleaner, test it on a hidden
area.
8
PLASTIC PARTS
Once a week, clean the surface from top to
bottom with a damp microfibre cloth. Using
solvent-based products may damage the sur-
face. Do not use products containing abrasive
agents, such as powders, pastes and cream
cleaners which can scratch the surface. Do not
use scouring pads or sponges.
* Product visualisation is for reference only. Variations are allowed depending
on the version of the product available in a given market.
To Next Page
Need help?
General