All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2021 Keystone Automotive Operations Inc. All Rights Reserved. 05/04/2021-Rev12
Page-14
Spring bar loading on lift brackets
22. To load the spring bar onto the lift bracket, orient the lift tool as shown below and come under
the spring bar. Then, put the “finger” of the lift tool into the square hole on the lift bracket and
using BOTH hands on the lift tool lift up firmly and the rotate and push the lift tool towards the
trailer until the spring bar is resting completely on the lift bracket and off of the 2 pins. If it is
too difficult to lift the spring bar, then raise the height of the trailer until the spring bar is closer
or vertically to the spring bar support surface of the lift bracket.
To Next Page
