All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2021 Keystone Automotive Operations Inc. All Rights Reserved. 05/04/2021-Rev12
Page-3
Measure Trailer Coupler & Frame Height
NOTE: Changing the weight of the trailer and/or tow vehicle by adding, moving or unloading
cargo may require the need to adjust how the weight distribution system is set up.
IMPORTANT! Set parking brake of tow vehicle and chock
the wheels of the trailer before lifting or lowering!
1. Line up the tow vehicle and trailer on level pavement, in a straight position.
2. Use the trailer tongue jack to level the trailer. Measure the distance from pavement to the inside
of the coupler socket, and record here:_______________
3. Mark a spot on the side of the frame on the trailer as close to the coupler as you can, measure
from this mark to the ground/pavement, and record here: ______________. This measurement
will be used later to determine if a proper setup has been achieved.
To Next Page
Loading...
