All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2021 Keystone Automotive Operations Inc. All Rights Reserved. 05/04/2021-Rev12
Page-4
Measure the Tow Vehicle
For vehicles with air springs, air shocks or automatic leveling systems only: Check vehicle owner's
manual or other instructions on these items. Unless otherwise indicated, air springs and air shocks
should be deflated to their minimum recommended pressure BEFORE assembling and adjusting
the weight distribution hitch. Pick reference points at the top center of the front and rear fender
well of towing vehicle. Measure and record the height to pavement here:
FRONT FENDER TO PAVEMENT:
REAR FENDER TO PAVEMENT:
ILLUSTRATION 3
Installation and Setup
NOTE: To obtain proper ball height on low ground clearance tow vehicles, shank may be oriented
in the “UP POSTION” as shown in Illustration 4. If shank is used in the “DOWN POSITION, check
shank for adequate ground clearance. Accessory shanks with greater height and length are
available from your dealer. IMPORTANT! Proper adjustment requires the use of the proper
length shank; proper head height and proper head tilt adjustment.
To Next Page
Loading...
