All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2021 Keystone Automotive Operations Inc. All Rights Reserved. 05/04/2021-Rev12
Page-5
4. Un-screw the 5/8-11 hex bolt until the bottom of the bolt threads are flush to the inside of the
channel.
5. Insert the shank into the receiver box. Hold CL TS head assembly onto shank as shown and
align the Centerline TS head so that the hitch ball is 1” above the coupler socket.
In this example, the shank will be mounted in the
Inverted position (as shown). And the bottom 3/4”
hex bolt will pass through the 2
nd
hole from the
bottom on the shank. If the bottom 3/4” hex bolt
lined up with the 2
nd
hole from the top of the shank,
then you would need to flip the shank over to the
Upright Position.
To Next Page
Loading...
