All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2021 Keystone Automotive Operations Inc. All Rights Reserved. 05/04/2021-Rev12
Page-6
6. Align the bottom hole on the channel to the hole on the shank and insert a 3/4” hex head bolt.
Remember the hole and orientation in these instructions are an example only, yours
may be different.
7. Add hardened washers marked with “F436” on to the large head pin, and then insert into the
welded bushing on the inside top of the channel. Start with 2 hardened washers if trailer frame
is 4” or 5”. Use 3 hardened washers if the trailer frame is 6”, 7” or 8”
To Next Page
Loading...
