8. Bend 1 of the tabs on each of the tab washers up and against the side of the jam nut. This will keep the 1” jam
nut from loosening.
Bent Tab on
Tab Washer
9. Finally, install the 3/16” D-Lock pins (or padlock) through the handles and the uprights.
WARNING: NEVER TOW WITHOUT LOCKING THE 5
TH
WHEEL HITCH HANDLES
WITH EITHER THE PROVIDED 3/16” D-LOCK PINS OR A PAD LOCK
3/16” D-LOCK PIN WITH THE
CLASP CLOSED AND LOCKED
OPTIONAL:
PAD LOCK
SHOWN
LOCKING
THE
HANDLES
10. Install the recommended HUSKY 5
th
Wheel hitch according to the provided instructions with that specific
product. Visit www.huskytowing.com for the latest instructions.
AllProductslimitedtoVehicleTowRating,seeVehicleOwnersManual.Visitwww.huskytow.comforWarrantyInformation/
TechSupport/ProductUpdates.©2017DTSManufacturing.AllRightsReserved.August2,2017‐Rev3Page‐6
To Next Page
Loading...
