To Next PageTo Next PageWhat to do if my Husky Work Light will not illuminate?
If your Husky Work Light isn't turning on, first, check that the power supply is switched on. Also, verify that the light switch itself is in the 'on' position. Finally, ensure that the cable is securely connected to the outlet.
General| Model Number | 7901304012 |
|---|---|
| Product Type | Work Light |
| Light Source | LED |
| Power Source | Battery |
| Battery Type | Lithium-Ion |
| Voltage | 20V |
| Color | Black/Red |
| Material | Plastic/Metal |
| Number of Lights | 1 |
| Warranty | 3 years |
| Cord Length | Cordless |
Covers defects in materials or workmanship for three years from purchase.
Ensure all parts are present and compare them with the Hardware Included and Package Contents lists.
Lists the required hardware for installation, including a wrench.
Details the components included in the product package.
Press and hold spring buckle to assemble work light head to work light body.
Release lock and lift light head upward to deploy tripod legs.
Shake the bracket to open the tripod legs.
Push light downward until all three legs contact the ground.
Lock the extension once legs contact ground, or release to fold.
Release top extension lock, raise head to desired height, then lock.
Unfold and adjust light head to desired angle. Tighten screw if loose.
Store the provided wrench in the designated slot next to the light heads.
Place power cord in tripod slot and plug into the outlet.
Press the rocker switch to turn the work light on or off.
Check power supply, switch, and cable connection if the light does not turn on.
Fix the screw beside the extension lock firmly using a Phillips screwdriver.
