□ Make sure the light is off.
□ Plug the USB charging cable into
the INPUT charging port.
□ The LED indicator displays a
blinking green light while charging.
□ The LED indicator turns green when
the battery is fully charged.
Operating the Utility Light
WARNING: Read and follow all safety warnings and instructions in the user manual before operating the
utility light.
IMPORTANT: Battery is ready to use when purchased. A fully charged battery will provide approximately
2 hours of continuous light. Do not allow the battery to completely discharge. A dim light indicates a low
battery. Turn OFF the utility light and recharge the battery as soon as possible.
4
Operation
□ Press the button to switch the utility light modes of high light, medium light, low light and ECO mode.
1
Recharging the Battery
2
USB Charging
Cable
To Next Page
Loading...