To Next PageTo Next Page
Need help?Do you have a question about the Husky G3002T-US and is the answer not in the manual?
Product intended for indoor use only and not for commercial or industrial applications.
Product may become unstable and tip over on uneven surfaces, causing injury or death.
Assembly and maintenance must be done by adults; use at least two people for moving or assembly.
Do not stand on the product or use it as a scaffold; always secure it to the wall with provided hardware.
Do not alter the product; periodically check and tighten all nuts and bolts for safety.
Keep children away; cabinet may tip if improperly opened. Do not place items on the top panel.
Excludes incidental damages and failures due to misuse or wear. Provides specific rights varying by state.
Details maximum load for doors, shelves, bottom panel, and total cabinet capacity.
Lists necessary tools such as hex wrench, drill, safety goggles, socket, and screwdriver bit.
Identifies all hardware components included in the package with their descriptions and quantities.
Provides a detailed list of all cabinet parts, including panels, shelves, doors, and straps with quantities.
Attaches adjustable feet to the bottom panel using specific screws, ensuring correct orientation.
Connects side panels to the bottom panel using hex socket head screws and cap screws for security.
Secures the top panel to the side panels using hex socket head screws, initially inserting by hand.
Attaches the back panels to the cabinet frame using hex socket head screws, ensuring floor protection.
Inserts shelf brackets into side panel slots at desired heights and places shelves onto the brackets.
Attaches the left and right doors to the side panels using hinge pins and adjusts for flush fit with magnets.
Installs grommets into desired cord access holes by prying out knock-outs and inserting the grommets.
Secures the cabinet to the wall using a safety bracket and strap, ensuring proper bolt placement for stability.
Regularly check and tighten all screws, nuts, and the safety strap to ensure continued stability.
Clean surfaces with a soft rag and water; use nonflammable fluids for grease and oil removal.
Lists all replacement parts with their corresponding part numbers, descriptions, and quantities for ordering.
Displays other Husky storage units that can be combined with this cabinet for a comprehensive storage system.
This document serves as a comprehensive use and care guide for a 30-inch storage cabinet, designed to assist users with assembly, maintenance, and general product information. The cabinet is part of the Husky brand, known for its range of home improvement and storage solutions.
The Husky 30-inch storage cabinet is primarily designed for organizing and storing various items in an indoor setting. Its robust construction and multiple shelves provide ample space to keep tools, household supplies, or other belongings neatly arranged and easily accessible. The cabinet features a top panel, a bottom panel, left and right side panels, a back panel, and two doors, creating an enclosed storage area. Three adjustable shelves are included, allowing users to customize the internal configuration to accommodate items of different sizes. The doors are equipped with hinges and magnets to ensure secure closure, keeping contents protected and out of sight. The cabinet is also designed with cord access holes, allowing for the management of electrical cords if the stored items require power. For enhanced safety and stability, the cabinet can be securely connected to a wall using provided anti-tip hardware, which is particularly important in environments where tipping might be a concern. The overall design aims to provide a practical and durable storage solution for residential use.
The cabinet is intended for indoor use only and is not designed for commercial or industrial applications. Assembly requires at least two adults to ensure safety and prevent personal injury or product damage, especially when moving or installing larger components. During assembly, it is crucial to keep the product on level surfaces to prevent instability and potential tipping. The guide emphasizes the importance of reading and following all safety instructions before assembly and use.
The assembly process begins with installing adjustable feet, which help level the cabinet on uneven floors. The side and bottom panels are then attached, followed by the top panel and back panels, forming the main structure of the cabinet. The shelves are installed using shelf brackets, which can be placed at desired heights to create customized storage compartments. The doors are attached last, and their alignment can be adjusted to ensure they close properly and engage with the magnets. The guide also details the installation of grommets for cord access, allowing users to manage cables for any electrical items stored inside.
A key safety feature is the option to connect the cabinet to a wall using a safety bracket and tapping bolts. This anti-tip hardware is highly recommended to prevent the cabinet from tipping over, especially if it contains heavy items or is in an area with children. Users are advised to drill the tapping bolts into a wall stud for maximum security.
The cabinet's design allows for coordination with other Husky storage units, such as wall cabinets, base cabinets, work surfaces, and pegboards, enabling users to create a comprehensive and customized storage system. Caster sets are also available for base cabinets, offering convenient mobility if desired.
Maintaining the Husky storage cabinet is straightforward and focuses on ensuring its longevity and safe operation. Users are advised to periodically check all nuts and bolts for tightness and to re-tighten them as necessary. This helps maintain the structural integrity of the cabinet and prevents components from becoming loose over time.
For cleaning, the surfaces of the cabinet should be periodically wiped with a soft rag and water. This simple cleaning routine helps remove dust and light grime, keeping the cabinet looking presentable. In cases where grease or oil stains are present, most standard cleaning fluids can be used. However, for safety, it is specifically recommended to use a non-flammable cleaning fluid to avoid any potential hazards.
The safety strap, if installed, should also be checked periodically for tightness to ensure that the cabinet remains securely fastened to the wall. This is a critical safety measure, and regular checks help confirm its effectiveness.
The guide also includes a section on service parts, providing a detailed list of all components with their corresponding part numbers. This information is valuable for ordering replacement parts, such as keys for the lock, shelves, or hardware, should any component become damaged or lost. This ensures that users can maintain their cabinet in optimal condition for an extended period.
Overall, the maintenance instructions are designed to be simple and effective, promoting the long-term durability and safe use of the Husky 30-inch storage cabinet.
General| Model Number | G3002T-US |
|---|---|
| Category | Storage |
| Number of Bays | 2 |
| Brand | Husky |
| Type | Tool Storage |
| Color | Black |
| Stackable | Yes |
| Wheeled | No |
