C
Cheryl LawsonAug 2, 2025
How to fix a Husky HU80215 Pressure Washer that won't start?
- RRobert MitchellAug 2, 2025
If your Husky Pressure Washer doesn't start when you depress the trigger, it could be due to a few reasons. First, ensure the power cord is properly connected to a working 120V AC, 60 Hz AC outlet, and the switch is turned on. Check the GFCI plug and press the reset button. Also, verify the house or shop breaker hasn't tripped. Make sure the pressure washer is on its own dedicated circuit. If you're using an extension cord, make sure it's rated to handle the pressure washer's current.