J
Justin YoungJul 29, 2025
Why my Husqvarna 10527SBE does not start?
- SSharon TaylorJul 30, 2025
If your Husqvarna Snow Blower doesn't start, several factors could be the cause. First, ensure the fuel shut-off valve is in the OPEN position and the safety ignition key is inserted. Check that the fuel tank is not empty and refuel with fresh, clean gasoline if needed. Make sure the throttle is in the FAST position and the choke is in the FULL position. Prime the engine as instructed in the Operation section of the manual. If the engine is flooded, wait a few minutes before restarting and avoid priming. Finally, verify the spark plug wire is connected and the spark plug is in good condition; replace if necessary. If the fuel is stale or contains water, empty the fuel tank and carburetor, then refill with fresh, clean gasoline.