A
aporterJul 27, 2025
How to start a Husqvarna 115iHD45 Trimmer?
- LLatasha FordJul 27, 2025
To start the Husqvarna Trimmer, push the power trigger and press the start button at the same time. To stop the product, release the power trigger.
To Next PageTo Next PageHow to start a Husqvarna 115iHD45 Trimmer?
To start the Husqvarna Trimmer, push the power trigger and press the start button at the same time. To stop the product, release the power trigger.
Why is the warning indicator flashing on my Husqvarna Trimmer (No. 3 in figure (5))?
The warning indicator might flash due to: * Overload: The cutting attachment could be jammed. Release it to resolve. * Temperature deviation: Allow the machine to cool down.
What to do if the warning indicator is flashing on my Husqvarna 115iHD45 Trimmer (No. 2 in figure (27))?
A flashing warning indicator (No. 2 in figure (27)) on your Husqvarna Trimmer could indicate several issues: * Temperature deviation: Ensure the battery is used in temperatures between -10 °C and 40 °C. * Over voltage: Verify that the mains voltage matches what's stated on the machine's rating plate. * If none of the above: Remove the battery from the battery charger. * Under voltage: Charge the battery.
What to do if the error LED flashes on my Husqvarna Trimmer?
If the error LED flashes on your Husqvarna Trimmer, it could be due to overload, meaning the cutting attachment cannot move freely. In this case, release the cutting attachment. Another cause could be temperature deviation, so let the product cool down.
Essential safety rules for general power tool operation.
Key personal safety measures, including PPE and alertness.
Crucial safety guidelines for the tool's electrical components.
Specific safety advice tailored for hedge trimmer operation.
Guidelines for safe battery usage and maintenance.
Details required personal protective equipment for safe operation.
Covers safety aspects for batteries and chargers.
Specific safety warnings and guidelines for battery use.
Safety precautions related to the battery charger.
Steps and checks required before operating the machine.
Procedures for starting and stopping the machine safely.
Critical safety guidelines to follow during operation.
General
