How to troubleshoot no spark on a Husqvarna Trimmer?
If there's no spark in your Husqvarna Trimmer, make sure the spark plug is dry and clean. Also, clean the spark plug, check that the electrode gap is correct, referring to technical data for the correct electrode gap, and ensure the spark plug is installed with a suppressor.
What to do if I put the wrong fuel in my Husqvarna Trimmer?
If the fuel tank of your Husqvarna Trimmer has the incorrect fuel type, drain the tank and use the correct fuel.
How to troubleshoot starting failure in a Husqvarna 236R?
If your Husqvarna Brush Cutter fails to start, ensure the stop switch is in the start position. Check the pawls; if they are binding, adjust or replace them. Clean around the pawls. Ensure the fuel type is correct by draining any incorrect fuel and replacing it with the right one. Adjust the idling speed using the T-screw, and make sure the spark plug is dry and clean. Verify the spark plug gap is correct and that the spark plug is fitted with a suppressor. Retighten the spark plug if it's loose, and replace the fuel filter if it's clogged.
What to do if the spark plug is loose on my Husqvarna Trimmer?
If your Husqvarna Trimmer's spark plug is loose, the suggested solution is to tighten it.
What to do if my Husqvarna 236R engine starts but does not stay running?
If your Husqvarna Brush Cutter starts but doesn't stay running, it might be due to incorrect fuel. Drain the old fuel and use the correct type. Alternatively, the air filter could be clogged, in which case you should clean it. Also, check the fuel filter; if it's clogged, replace it.
General| Weight | 7.2 kg |
|---|---|
| Fuel Tank Volume | 0.5 l |
| Sound Power Level, Guaranteed (LWA) | 107 dB(A) |
| Power output | 0.8 kW |
| Engine Type | 2-stroke |
| Fuel Tank Capacity | 0.5 l |
| Shaft Type | Straight |
| Sound Power Level | 107 dB(A) |
To Next Page
