Need help?Do you have a question about the Husqvarna 323L and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Cylinder Displacement | 24.5 cm³ |
| Power Output | 0.9 kW |
| Sound Pressure Level | 94 dB(A) |
| Sound Power Level | 106 dB(A) |
| Shaft Type | Straight |
| Starter System | Recoil |
| Fuel Tank Volume | 0.5 l |
Explains various symbols used in the manual and on the machine.
Details necessary personal protective gear for safe operation.
Describes the safety features of the machine.
Explains the function and operation of the throttle trigger lock.
Describes the function and use of the stop switch.
Explains the purpose and importance of the cutting attachment guard.
Details the machine's vibration damping system and its benefits.
Explains the muffler's function and safety precautions.
Specifies the intended use of the trimmer head.
Describes the function of the locking nut for cutting equipment.
Instructions for checking and maintaining safety equipment.
Rules for correct maintenance and use of cutting equipment.
How to safely assemble and tighten the locking nut.
Basic safety precautions for operating the trimmer.
Step-by-step instructions for starting the machine.
Safety precautions for handling fuel and refueling.
Guidelines for safely transporting and storing the machine.
General advice and precautions for working with the trimmer.
Essential safety measures to observe while working.
Proper techniques for efficient and safe operation.
Techniques for trimming grass with specific cutting heads.
Technique for removing unwanted vegetation.
Technique for trimming grass in difficult-to-reach areas.
Method for cleaning debris using the trimmer.
Identifies and labels all parts of the trimmer.
Instructions for assembling the loop handlebar on specific models.
Guide to assembling and disassembling the two-part shaft.
Instructions for assembling the loop handlebar on other models.
Critical steps for correctly assembling the trimmer head.
Steps for assembling the guard and trimmer head for Superauto II.
Instructions for assembling guards and cutting equipment on specific models.
Guide to fitting the spray guard and trimmer head on the 325C model.
Guide to fitting the spray guard and trimmer head on the 325Cx model.
Details on the correct gasoline and oil mixture ratio.
Safety precautions and steps for refueling the machine.
Essential checks to perform before starting the machine.
Step-by-step instructions for starting the machine.
Explains carburetor function, settings, and adjustment procedures.
Initial carburetor settings and recommendations.
Detailed guide for fine-tuning the carburetor.
How to adjust the low speed needle for optimal performance.
Procedure for adjusting the idle speed using the T-screw.
How to adjust the high speed needle for power and efficiency.
Characteristics of a correctly adjusted carburetor and common issues.
Maintenance of the muffler, including spark arrest screen.
How to clean and maintain the engine's cooling system.
Spark plug condition, cleaning, gap adjustment, and replacement.
Lubrication requirements for the two-part shaft.
Cleaning and replacement of the air filter.
Detailed steps for cleaning the air filter.
Instructions for oiling the air filter when used in dusty conditions.
Grease requirements for the angle gear.
Overview of daily, weekly, and monthly maintenance tasks.
Specifications for engine displacement, bore, stroke, and speeds.
Details on the manufacturer and type of ignition system.
Information on the carburetor and fuel tank capacity.
Weight specifications for the machine.
Measured sound pressure levels at the user's ear.
Measured vibration levels on the handles.
Engine specifications for 325C and 325CX series.
Ignition system details for 325C and 325CX series.
Fuel system details for 325C and 325CX series.
Weight specifications for 325C and 325CX series.
Sound pressure levels for 325C and 325CX series.
Vibration levels for 325C and 325CX series.
Lists approved accessories for the 325C model.
Lists approved accessories for the 325CX model.
Lists approved accessories for multiple models.
Lists available attachments and their compatible models.
Explains EPA standards and warranty terms for emissions.
Details the warranty period for emission-related parts.
Owner's duties regarding maintenance and care of the engine.
Defines warranty start date and duration.
Outlines warranty terms, claims, and service procedures.
Lists specific parts covered under the emissions warranty.
States the owner's responsibility for maintenance.
To Next Page
