Need help?Do you have a question about the Husqvarna 325HE4 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 0.8 kW |
| Cutting Width | 45 cm |
| Fuel Tank Volume | 0.5 l |
| Line Diameter | 2.4 mm |
| Shaft Type | Straight |
| Displacement | 25.4 cm³ |
| Blade Length | Not applicable |
Identifies and lists the various parts of the hedge trimmer using numbered labels.
Highlights crucial safety information, including electromagnetic fields and risks from running engines in confined spaces.
Details necessary protective gear such as helmets, hearing, eye protection, gloves, and boots.
Specifies appropriate attire and recommends keeping a first aid kit readily available.
Explains the purpose and checks for the machine's safety features.
Describes the function and operation of the throttle lockout mechanism.
Details the stop switch function and the hand guard's role in preventing contact with blades.
Describes the system designed to minimize vibration and potential health risks.
Explains the muffler's role in noise reduction and exhaust management.
Warns about hot mufflers, spark arrestors, and fire risks from exhaust fumes.
Provides instructions on blade adjustment, sharpening, and replacement for optimal cutting.
Warns about the hot gear housing and advises against touching it to prevent burns.
Instructions for attaching the handle using two screws.
Guidance on wearing and adjusting the harness for optimal control and reduced fatigue.
Steps for securing the impact guard with screws and re-tightening after initial use.
Critical warnings and precautions related to handling fuel, including fire and inhalation risks.
Guidelines for safely transporting and storing the machine and fuel, emphasizing ventilation and spark prevention.
Details required petrol type, octane, oil specifications, and mixing ratios.
Step-by-step instructions for safe refueling, emphasizing outdoor use, no sparks, and slow cap opening.
Visual guide and instructions on how to mix petrol and oil correctly in a clean container.
A checklist of essential inspections before operating the machine to ensure safety and proper function.
Detailed steps for starting the engine using the primer bulb, choke, and pull cord, with cautionary notes.
Instructions on how to switch off the engine using the stop switch and safety precautions during maintenance.
Basic safety advice and considerations for operating the hedge trimmer effectively and safely.
Reinforces the need for appropriate personal protective equipment during operation.
Guidelines for maintaining a stable position, using both hands, and controlling the throttle.
Rules for maintaining safe distances, keeping children and others away, and checking the work area.
Procedures for safely finishing work, including fitting guards and disconnecting the spark plug.
Advice on using a swinging action, adjusting throttle, and positioning the engine when trimming.
Instructions on how to fold the cutting unit for safe transport and storage, including angle adjustment.
Instructions for adjusting the idle speed and troubleshooting issues related to the carburettor.
Guidance on checking, cleaning, and maintaining the muffler, including spark arrestor mesh and catalytic converters.
Explains the cooling system components and the importance of keeping them clean to prevent overheating.
Information on spark plug condition, cleaning, gap adjustment, and replacement recommendations.
Details the importance of a clean air filter and the procedure for cleaning or replacing it.
Instructions for oiling the air filter using specific filter oil for dusty conditions.
Procedures for lubricating the gear housing using a grease gun at specified intervals.
Steps for cleaning blades and lubricating blade bars before storage.
A detailed schedule listing daily, weekly, and monthly maintenance tasks for the machine.
Provides detailed specifications for the engine, fuel system, noise, and vibration levels.
States compliance with European directives for machinery, EMC, and noise emissions.
To Next Page