Need help?Do you have a question about the Husqvarna 357XP/XPGl 357XP E-tech and is the answer not in the manual?
General| Maximum power speed | 9600 rpm |
|---|---|
| Idling speed | 2700 rpm |
| Engine displacement | 56.5 cm³ |
| Oil pump type | Adjustable |
| Chain pitch | 3/8" |
Essential checks and actions to perform before operating the chain saw for the first time.
Details the mandatory personal protective gear required for safe chain saw operation.
Discusses specific cutting equipment features that help mitigate kickback risks.
Instructions for maintaining chain sharpness and adjusting depth gauges.
Instructions on how to properly tension the saw chain for safety and performance.
Step-by-step instructions for attaching the guide bar and saw chain to the chainsaw.
Safe procedures for refueling the chain saw with the fuel mixture.
Detailed instructions for starting and stopping the chain saw engine safely.
Procedures for starting the chain saw when the engine is cold.
Procedures for starting the chain saw when the engine is warm.
Instructions on how to safely shut down the chain saw engine.
Techniques to reduce or eliminate the risk of kickback during operation.
Advice on managing wood tension and kickback risks during cutting.
Introduction to tree felling, emphasizing experience and safety.
Planning the felling direction and ensuring a safe retreat path.
How to make precise directional cuts for controlled tree felling.
Completing the felling cut and understanding the role of the felling hinge.
Safe methods for cutting material under tension.
Detailed explanation and prevention strategies for kickback.
Definition and explanation of the kickback phenomenon.
Specific safety advice for limbing operations, focusing on kickback prevention.
Detailed steps for adjusting the carburetor, including settings and fine-tuning.
Guidance on adjusting the high-speed (H) jet for optimal performance.
Procedures for inspecting and maintaining all safety features of the chain saw.
Specific checks for the chain brake and front hand guard.
How to test the automatic inertia brake release mechanism.
Verifying the functionality of the chain brake trigger mechanism.
How to clean and replace the air filter to prevent engine issues.
General safety guidelines for operating chain saws according to ANSI standards.
Specific advice on preventing kickback injuries.
To Next Page