To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna 385XP EPA II and is the answer not in the manual?
General| Maximum power speed | 9600 rpm |
|---|---|
| Recommended bar length, max | 70 cm |
| Recommended bar length, min | 45 cm |
| Idle speed | 2700 rpm |
| Fuel tank volume | 0.9 l |
| Oil tank volume | 0.4 l |
| Chain pitch | 3/8 inch |
| Chain gauge | 0.058 inches |
Explains symbols used in the manual and on the machine for clear understanding.
Instructions for sharpening chain and setting raker clearance.
Detailed steps for sharpening chain cutting teeth.
Guide to correctly setting raker clearance for safe cutting.
Procedures for properly tensioning the chain.
Details general techniques for cutting wood safely and effectively.
Warnings and considerations for felling trees safely.
How to make directional cuts to control tree felling.
Details making the main felling cut.
Safety measures for cutting wood under tension.
Explains the phenomenon of kickback and its causes.
Fundamental safety rules and techniques to prevent kickback.
Identifies and explains the different parts of the chain saw.
Step-by-step guide on how to correctly fit the bar and chain.
Details the correct mixing ratio for gasoline and two-stroke oil.
Safety precautions and procedures for refueling the chain saw.
Detailed steps for starting the chain saw when the engine is cold.
Instructions on how to safely stop the chain saw engine.
Guide to adjusting the carburetor for performance and emissions.
Detailed steps for fine-tuning carburetor settings.
How to adjust the automatic oil pump for chain lubrication.
Routine checks and cleaning tasks to perform daily.
