Do you have a question about the Husqvarna 385XP and is the answer not in the manual?
Idle speed | 2700 rpm |
---|---|
Maximum power speed | 9600 rpm |
Fuel tank volume | 0.9 L |
Oil tank volume | 0.4 liters |
Chain pitch | 3/8 inch |
Chain gauge | 0.058 inch |
Bar length | 18-28 inches |
Identifies and labels the various parts of the chain saw with numbers.
Essential checks and reading before operating the chain saw for the first time.
Key considerations and warnings for safe operation and product use.
Lists and describes essential protective gear for chain saw operation.
Explains the function and importance of the saw's built-in safety features.
Details the function and operation of the chain brake and front hand guard.
Explains manual/automatic activation and how kickback occurs.
Addresses hand/inertia activation and chain brake limitations.
Introduces choosing and maintaining cutting equipment for safety.
Guidelines for chain sharpness, depth gauge, tension, and lubrication.
Discusses using specific equipment to minimize kickback risk.
Explains how to adjust the depth gauge for optimal cutting and safety.
Provides instructions on how to properly tension the saw chain.
Step-by-step guide to installing the guide bar and saw chain.
Information on fuel types, octane ratings, and mixtures for two-stroke engines.
Recommends specific oils and warns against using incorrect types.
Safety precautions and procedures for refuelling the chain saw.
Essential safety notes and warnings before starting the engine.
Step-by-step instructions for starting a cold engine.
A checklist of safety and operational checks before starting work.
Basic safety rules and advice for using a chain saw effectively and safely.
Specifies safe distance, felling direction, and clearing the retreat path.
Explains how to make the initial cuts to guide the tree's fall.
Describes the final cut and the importance of the felling hinge.
Defines kickback and explains the cause (kickback zone).
Checks for wear and function of the chain brake and front hand guard.
Lists approved bar and chain combinations for CE and non-CE markets.