Husqvarna 385XP - Contents; Table of Contents

English – 3
CONTENTS
Contents
KEY TO SYMBOLS
Symbols on the machine: .............................................. 2
Symbols in the operator’s manual: ................................ 2
CONTENTS
Contents ....................................................................... 3
INTRODUCTION
Dear Customer, ............................................................. 4
WHAT IS WHAT?
What is what on the chain saw? ................................... 5
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw ...................................... 6
Important ....................................................................... 6
Always use common sense .......................................... 6
Personal protective equipment ...................................... 7
Machine′s safety equipment ......................................... 7
Cutting equipment ......................................................... 10
ASSEMBLY
Fitting the bar and chain ............................................... 16
FUEL HANDLING
Fuel ............................................................................... 17
STARTING AND STOPPING
Starting and stopping .................................................... 19
WORKING TECHNIQUES
Before use: .................................................................... 21
General working instructions ........................................ 21
How to avoid kickback ................................................... 28
MAINTENANCE
General ......................................................................... 29
Carburettor adjustment ................................................. 29
Carburettor with movement limiters .............................. 29
Carburettor without movement limiters ......................... 30
Checking, maintaining and servicing chain saw safety
equipment ..................................................................... 31
Muffler ........................................................................... 33
Starter ........................................................................... 34
Air filter .......................................................................... 35
Spark plug ..................................................................... 35
Lubricating the bar tip sprocket ..................................... 35
Needle bearing lubrication ............................................ 36
Adjustment of the oil pump ........................................... 36
Cooling system ............................................................. 36
”Air Injection” centrifugal cleaning ................................. 36
Winter use ..................................................................... 36
Heated handles ............................................................. 37
Maintenance schedule .................................................. 38
TECHNICAL DATA
Technical data ............................................................... 39
Bar and chain combinations ......................................... 40
Saw chain filing and file gauges .................................... 40
EC-declaration of conformity ......................................... 41