EasyManua.ls Logo

Husqvarna 350i - User Manual

Husqvarna 350i
120 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
350i
EN Operator's manual 2-38
ES-MX Manual de usuario 39-77
FR-CA Manuel d’utilisation 78-117

Table of Contents

Questions and Answers

  • K
    Kathryn LewisJul 29, 2025
    What to do if the warning indicator flashes on my Husqvarna 350i Chainsaw?
    • J
      julie19Jul 29, 2025
      If the warning indicator on your Husqvarna Chainsaw is flashing, it could be due to several reasons: * The chain brake might be engaged. If so, disengage the chain brake. * There could be a temperature deviation. Allow the product to cool down. * The saw chain may be overloaded and unable to move. Release the saw chain. * The power trigger and the start/stop button may have been pushed simultaneously. Release the power trigger to activate the product.
  • T
    Tammy MillerAug 5, 2025
    Why is the Error LED flashing on my Husqvarna 350i Chainsaw?
    • K
      Kenneth RodgersAug 5, 2025
      If the Error LED flashes on your Husqvarna Chainsaw, it could be due to: * Temperature deviation. Ensure you use the battery in temperatures between -10°C (14°F) and 40°C (104°F). * Too much voltage. Verify that the mains voltage aligns with the voltage of the product, referring to the rating plate. * Remove the battery from the battery charger.
  • T
    Tammy DiazAug 14, 2025
    How to fix a flashing green activate LED on my Husqvarna Chainsaw?
    • R
      Robin MillsAug 14, 2025
      If the green activate LED is flashing on your Husqvarna Chainsaw, it indicates low battery voltage. Charge the battery.
  • C
    Christian Lopez DVMAug 21, 2025
    What does it mean when the charging LED flashes green on my Husqvarna 350i Chainsaw?
    • J
      James GarciaAug 21, 2025
      If the charging LED flashes green on your Husqvarna Chainsaw, it means there's a temperature deviation. The battery is either too cold or too hot to charge or use. Let the battery cool down or warm it up. Use the battery charger in ambient temperatures between 5 °C (41 °F) and 40 °C (104 °F).

Summary

Safety Information

Safety Definitions and General Warnings

Explains warning types and provides general safety advice for power tools.

Personal Safety and Tool Usage

Focuses on operator alertness, PPE, and proper tool handling.

Chain Saw Specific Safety

General Chain Saw Safety

Specific safety advice for operating a chain saw.

Kickback Causes and Prevention

Explains kickback mechanisms and how to avoid them.

General and Operational Safety

Reinforces general safety principles and provides operation guidelines.

Safe Operation Practices

Operator Stability and Kickback Risk

Emphasizes stable footing and managing kickback risks.

Operational Safety and Kickback

Safety Devices and User Interface

Chain Brake Operation Explained

Details how the chain brake engages and disengages.

Kickback Prevention Tactics

Operation

Pre-Operation Checks and Chain Oil

Essential checks before use and guidance on correct chain oil.

Battery Information and Charging

Details on battery status, charging procedures, and ambient temperatures.

Operation: Kickback Information

Understanding Kickback Hazards

Detailed explanation of kickback causes and prevention.

Common Kickback Questions

Starting the Product Safely

Instructions for safely starting the chainsaw.

Operation: Advanced Techniques

Stopping the Product

Procedure for safely shutting down the product.

Operation: Trunk Cutting and Felling

Tree Felling: Safety and Planning

Tree Felling Technique Introduction

Introduction and warnings for safely felling trees.

Safe Distance and Felling Direction

Clearing Area and Retreat Path

Tree Felling: Methods and Hinges

Felling Tree: Directional and Safe Corner Cuts

Methods for felling trees using directional and safe corner cuts.

Creating the Felling Hinge

Freeing Trapped Trees and Cutting Tensioned Wood

Procedures for freeing trapped trees and cutting tensioned wood.

Maintenance

Maintenance Introduction and Schedule

Sharpening and Depth Gauge Adjustment

Sharpening the Cutters

Adjusting the Depth Gauge Setting

Tightening the Saw Chain

Procedure for adjusting the saw chain tension.

Troubleshooting

User Interface Faults

Lists possible faults and solutions for the product's user interface.

Battery Faults

Troubleshooting for battery display issues and low voltage.

Battery Charger Faults

Faults and solutions for the battery charger.

Husqvarna 350i Specifications

General IconGeneral
Power SourceBattery
Battery Voltage36 V
Recommended Bar Length14 in
Chain Pitch3/8 in
Oil Tank Volume0.2 L
Bar Length Range12-16 in

Related product manuals