Need help?Do you have a question about the Husqvarna 359G E-tech and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Engine Displacement | 59 cm³ |
| Chain Gauge | 0.058" |
| Fuel Tank Volume | 0.68 l |
| Oil Tank Volume | 0.38 liters |
| Chain Pitch | 3/8" |
| Power Output | 3.4 kW |
Explains symbols found on the physical machine for operation and safety.
Explains symbols used within the operator's manual for instructions and guidance.
A welcoming message to the customer from the manufacturer.
Identifies and labels the various parts of the chain saw.
Provides essential checks and advice before operating the chain saw for the first time.
Details the mandatory personal protective equipment (PPE) required for safe operation.
Explains the built-in safety features of the machine and their importance.
Explains throttle lockout, chain catcher, guards, and vibration damping systems.
Guidance on choosing, maintaining, and safely using cutting equipment.
Instructions for sharpening the saw chain for optimal performance and safety.
Procedures for correctly tensioning the saw chain to ensure safety and performance.
Guidance on lubricating cutting equipment and checking for wear.
Step-by-step instructions for assembling the guide bar and saw chain.
Information on the types of gasoline, two-stroke oil, and chain oil required.
Procedures for safe refueling, handling fuel, and storing the machine.
Detailed steps for starting the chain saw engine, including cold and warm start.
Instructions on how to properly stop the chain saw engine.
Essential checks before use and fundamental safety practices for operation.
Explains cutting methods and how to prevent kickback incidents.
Comprehensive guide on felling trees, including directional cuts and safety zones.
Covers cutting under tension, avoiding kickback, and understanding its causes.
Instructions for adjusting the carburetor for optimal engine performance.
Procedures for checking and maintaining the chain brake, guards, and other safety features.
Verifying the operation of throttle, chain catcher, guards, and vibration damping.
Maintenance for the stop switch, muffler, and starter housing.
Procedures for starter components and cleaning the air filter.
Maintenance tasks for the spark plug, lubrication points, and oil pump adjustment.
Maintaining the cooling system and adapting the saw for winter use.
Daily, weekly, and monthly maintenance tasks outlined in a schedule.
Technical specifications for the engine, ignition, and fuel systems.
Recommended bars/chains and guidance on chain filing and gauges.
Details owner's rights, responsibilities, and manufacturer's warranty coverage for emission parts.
Lists emission control parts and owner's maintenance responsibility.
General safety precautions for users, including kickback and other operational risks.
To Next Page