Need help?Do you have a question about the Husqvarna E-tech and is the answer not in the manual?
General| Oil Tank Volume | 0.2 L |
|---|---|
| Battery Voltage | 36 V |
| Power Source | Battery |
| Recommended Bar Length | 35 cm |
| Bar Length | 35 cm |
| Chain Pitch | 3/8" |
| Chain Gauge | 1.3 mm |
Explains symbols displayed on the actual machine for safety and information.
Identifies and labels various parts of the chain saw with corresponding numbers.
Essential checks and preparations before operating the chain saw for the first time.
Crucial safety information and general advice for operating the machine safely.
Details the necessary protective gear to be worn by the operator for safety.
Explains the safety features built into the machine for user protection.
Describes the function and importance of the chain brake and front hand guard.
Guidance on choosing and maintaining cutting equipment for safety and performance.
Instructions on how to sharpen the chain and set the depth gauge correctly.
Guidance on setting the depth gauge for optimal cutting and safety.
Procedures for adjusting the depth gauge for safe operation.
Procedures for correctly tensioning the saw chain to prevent accidents.
Guidance on lubricating the bar and chain for proper function and safety.
Details on how to fill the chain oil tank and the automatic lubrication system.
Daily checks for wear on chain, drive sprocket, and guide bar.
Step-by-step instructions for attaching the guide bar and saw chain.
General overview and specific steps for starting and stopping the engine.
Specific steps for starting the engine when it is cold.
Essential checks, general instructions, and basic safety rules before operation.
Detailed guide on adjusting the carburetor for optimal performance.
Procedure to test the automatic activation of the chain brake.
Procedure to test the functionality and condition of the right-hand brake trigger.
How to clean and replace the air filter to prevent malfunctions.
Factors affecting spark plug condition and how to check/replace it.
Instructions on adjusting the oil pump for proper chain lubrication.
Lists approved guide bar and saw chain combinations for compatibility.
To Next Page