Husqvarna E-tech User Manual

42 – English
TECHNICAL DATA
EC Declaration of Conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 346XP, 346XP TrioBrake, 346XPG, 346XPG TrioBrake, 353, 353 TrioBrake, 353G,
353G TrioBrake, 346XP E-tech, 346XPG E-tech TrioBrake, 353 E-tech, 353 E-tech TrioBrake and 353G E-tech from
2013’s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial
number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:
- of May 17, 2006 ”relating to machinery” 2006/42/EC.
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/09/2086 - 346XP TrioBrake, 346XPG TrioBrake,
346XPG E-tech TrioBrke 0404/09/2087 - 353 TrioBrake, 353G TrioBrake, 353G E-tech TrioBrake 0404/09/2088 – 346XP,
346XPG, 346XP E-tech, 346XPG E-tech 0404/09/2085 – 353, 353G, 353 E-tech, 353G E-tech.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The
certificates have the numbers: 01/161/002 – 346XP, 346XPG, 346XP TrioBrake, 346XPG TrioBrake, 01/161/061 – 353,
353G, 353 TrioBrake, 353G TrioBrake, 01/161/003 – 346XP E-tech, 346XPG E-tech, 346XP E-tech TrioBrake, 346XPG
E-tech TrioBrake,01/161/046 - 353 E-tech, 353G E-tech, 353 E-tech TrioBrake, 353G E-tech TrioBrake.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna October 31, 2013
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)

Husqvarna E-tech Specifications

General

Oil Tank Volume	0.2 L
Battery Voltage	36 V
Power Source	Battery
Recommended Bar Length	35 cm
Bar Length	35 cm
Chain Pitch	3/8"
Chain Gauge	1.3 mm