CONTENTS
4 – English
Contents
KEY TO SYMBOLS
Symbols on the machine: ...................................... 2
Symbols in the operator’s manual: ........................ 3
CONTENTS
Contents ............................................................... 4
INTRODUCTION
Dear Customer, ..................................................... 5
WHAT IS WHAT?
What is what on the chain saw? ........................... 6
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 7
Important .............................................................. 7
Always use common sense .................................. 7
Personal protective equipment ............................. 8
Machine
′
s safety equipment ................................. 8
Cutting equipment ................................................. 11
ASSEMBLY
Fitting the bar and chain ....................................... 18
FUEL HANDLING
Fuel ....................................................................... 19
Fueling .................................................................. 20
Fuel safety ............................................................ 20
STARTING AND STOPPING
Starting and stopping ............................................ 21
WORKING TECHNIQUES
Before use: ............................................................ 23
General working instructions ................................ 23
How to avoid kickback ........................................... 29
MAINTENANCE
General ................................................................. 31
Carburettor adjustment ......................................... 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 32
Muffler ................................................................... 34
Starter housing ..................................................... 35
Air filter .................................................................. 36
Spark plug ............................................................. 36
Lubricating the bar tip sprocket ............................. 37
Needle bearing lubrication .................................... 37
Adjustment of the oil pump ................................... 37
Cooling system ..................................................... 37
”Air Injection” centrifugal cleaning ......................... 38
Winter use ............................................................. 38
Heated handles ..................................................... 38
Maintenance schedule .......................................... 39
TECHNICAL DATA
Technical data ....................................................... 40
Guide bar and saw chain combinations ................ 41
Saw chain filing and file gauges ............................ 41
EC Declaration of Conformity ............................... 42