Need help?Do you have a question about the Husqvarna 535iRXT and is the answer not in the manual?
Emphasizes reading and understanding all safety instructions before operation.
Covers general safety practices and the interpretation of product safety symbols.
Warning: Remove battery before servicing; do not reinstall until assembly is complete.
Warning: Remove cutting equipment before repairs; do not install until product is assembled.
Procedures for replacing the shaft and servicing the bevel gear assembly.
Lists symptoms, causes, and recommended steps for troubleshooting product issues.
Emphasizes reading and understanding all safety instructions before operation.
Covers general safety practices and the interpretation of product safety symbols.
Warning: Remove battery before servicing; do not reinstall until assembly is complete.
Warning: Remove cutting equipment before repairs; do not install until product is assembled.
Procedures for replacing the shaft and servicing the bevel gear assembly.
Lists symptoms, causes, and recommended steps for troubleshooting product issues.
General| Battery Voltage | 36 V |
|---|---|
| Handle Type | Loop handle |
| Vibration Level | 2.5 m/s² |
| Recommended Charger | QC330 |
| Engine Type | Brushless |
| Cutting Width/Diameter | 43 cm |
| Recommended Battery | BLi300 |
To Next Page
