EasyManua.ls Logo

Husqvarna 545 - Seaming and Overcasting Stitches; Overcast and Overlock Stitches

Husqvarna 545
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42 Instruction book Lily 555/545
Seam and overcast
Some stitches can be used for seaming and overcasting directly on the edge
where a 5 mm (1/4") seam is allowed. Place the fabric so that the inside
right ”toe” of the presser foot follows the edge of the fabric.
Sewing
Overlock is chiefl y used for sewing
heavy stretch fabric. Snap on presser
foot B.
Overlock stitch (only model 555) is
used for medium stretch fabric. Snap
on preser foot B.
Overcast stitch, may be used to
sew light and medium non-stretch
fabric and light stretch fabric. Snap
on presser foot J.
Presser foot J is also used to over-
lock and overcast many different
fabrics with the exception of heavy,
rm fabrics. The pin on the press-
ser foot should follow the edge of
the fabric and will prevent the fabric
from puckering. Stitch width 5-6
mm. When using stitch width 4.5 or
lower, use presser foot A.

Other manuals for Husqvarna 545

Related product manuals