Need help?Do you have a question about the Husqvarna 562XP and is the answer not in the manual?
General| Engine Power | 3.5 kW |
|---|---|
| Cylinder Displacement | 59.8 cm³ |
| Maximum Power Speed | 9600 rpm |
| Chain Pitch | 3/8" |
| Weight (excl. cutting equipment) | 6.1 kg |
| Sound Pressure Level | 106 dB(A) |
| Sound Power Level | 118 dB(A) |
| Chain Gauge | 0.058 in |
| Fuel Tank Volume | 0.65 liters |
| Recommended Bar Length, Min-Max | 15-28 inches |
Illustrations and explanations of symbols found on the machine.
Explanations of symbols used within the operator's manual.
Identification of all parts and components of the chain saw using a diagram.
Essential checks and preparations before operating the machine for the first time.
Key safety considerations and warnings for safe operation.
Emphasizes the importance of care, awareness, and seeking expert advice.
Details required protective gear for safe operation.
Explanation of the chain saw's built-in safety mechanisms.
Description of the chain brake's function and operation.
Detailed explanation of how the chain brake is activated and used.
Explains the function of the throttle lockout for preventing accidental acceleration.
Describes the purpose and function of the chain catcher.
Explains the protective role of the right hand guard.
Details the system designed to reduce vibration during operation.
Instructions on how to use the stop switch to turn off the engine.
Information on the muffler's role in noise reduction and exhaust direction.
Guidelines for choosing and maintaining cutting equipment.
Basic rules for maintaining cutting equipment for safety and performance.
Details on how cutting equipment design minimizes kickback risk.
Information on bar characteristics that affect kickback.
Explanation of chain links and kickback danger.
Definitions of terms used to describe bar and chain specifications.
Instructions for sharpening cutting teeth and adjusting depth gauge.
General advice on sharpening cutting teeth for optimal performance.
Step-by-step guide for sharpening chain cutting teeth.
Recommendations for adjusting the depth gauge for optimal cutting.
Detailed steps for adjusting the depth gauge setting.
Instructions on how to properly tension the saw chain.
Importance and methods for lubricating the chain and bar.
Details on recommended chain oil and its properties.
Steps for filling the chain oil tank correctly.
How to check if the chain lubrication system is working.
Information about the chain drive sprocket.
How to check for wear on the chain, bar, and drive sprocket.
Instructions for regularly checking the bar for wear and damage.
Step-by-step guide for installing the bar and chain.
Instructions for fitting the spike bumper accessory.
Details about the type of petrol and oil mixture required.
Table showing recommended fuel and oil mixing ratios.
Information on the type and grade of petrol to use.
Recommendations for using environmentally friendly fuel options.
Advice on operating the machine during the initial period.
Details on the correct type of two-stroke oil to use.
Information and recommendations for chain oil.
Step-by-step instructions for safely refuelling the machine.
Essential safety measures to prevent fire and explosion hazards.
Guidelines for safely transporting and storing the chain saw.
Instructions for preparing the machine for extended periods of storage.
Detailed steps for starting the engine.
Procedure for starting the machine when the engine is cold.
Procedure for starting the machine when the engine is warm.
Instructions on how to safely stop the engine.
Essential checks to perform before each use of the chain saw.
Basic safety rules and advice for operating the chain saw.
Fundamental safety guidelines for working with the chain saw.
Specific rules for safe and effective operation.
How to safely remove branches from a felled tree.
Instructions for safely cutting logs into desired lengths.
Fundamental techniques for making cuts with the chain saw.
Definitions of terms related to cutting and working techniques.
Safe methods for cutting logs, including different support scenarios.
Expert advice and safety precautions for felling trees.
Ensuring a safe distance from the felling area.
Factors influencing and methods for controlling tree fall direction.
Detailed steps for making felling cuts to control tree fall.
Procedure for making directional cuts for controlled felling.
Preparing a safe retreat path before tree felling.
Instructions for completing the felling cut for tree removal.
Safety procedures for dealing with a fallen, trapped tree.
Techniques for safely cutting wood under tension.
Essential techniques and precautions to prevent kickback.
Explanation of what kickback is and how it occurs.
Specific warnings and techniques to avoid kickback during limbing.
User's responsibilities for maintenance and service.
Instructions for adjusting the carburettor for optimal performance.
Explanation of the AutoTune function for automatic carburettor adjustment.
Steps for engine adjustment and initial running-in.
Procedures for checking and maintaining safety features.
Checks for wear and damage to the chain brake and front hand guard.
Procedure to test the inertia brake release mechanism.
How to verify the functionality of the brake trigger.
Ensuring the throttle lockout functions correctly.
Verifying the condition and attachment of the chain catcher.
Checking the right hand guard for damage or defects.
Regularly checking vibration damping units for cracks or deformation.
Ensuring the engine stops correctly when the stop switch is used.
Information on muffler maintenance, including spark arrestor mesh.
Procedures for changing starter components like cords and springs.
Step-by-step guide to replace a worn or broken starter cord.
How to properly tension the recoil spring after replacement.
Instructions for replacing a broken or worn recoil spring.
Steps for correctly fitting the starter assembly.
Cleaning and replacing the air filter to ensure optimal engine function.
Checking and replacing the spark plug for engine performance.
How and when to lubricate the bar tip sprocket.
Lubrication procedure for the needle bearing on the output shaft.
Instructions for adjusting the oil pump for proper chain lubrication.
Cleaning and maintaining the cooling system for proper engine temperature.
Explanation and maintenance of the air injection cleaning system.
Adjustments for running the machine in cold weather conditions.
Information on using the heated handles feature.
Explanation of the electrically heated carburettor system.
List of maintenance checks to perform daily.
List of maintenance checks to perform weekly.
List of maintenance checks to perform monthly.
Technical details regarding the engine.
Details about the ignition system components.
Specifications for fuel tank, oil pump, and oil tank.
Weight of the chain saw without bar and chain.
Measured and guaranteed sound power levels.
Equivalent sound pressure level at the operator's ear.
Equivalent vibration levels for front and rear handles.
Details on bar length, pitch, gauge, and drive links.
Chain and bar specifications specific to 562XP and 562XPG models.
Lists approved bar and chain combinations for various models.
Information on saw chain filing angles and recommended file gauges.
Formal declaration of conformity with EU directives and standards.
To Next Page
