Husqvarna 565 User Manual

EE
EE
nn
nn
gg
gg
ll
ll
ii
ii
ss
ss
hh
hh
565 572XP 572XPG
Oper ator’s manual
Please r ead the operator’s manual carefully and make sure you understand the instructions
bef
ore using the machine.

Husqvarna 565 Specifications

General

Cylinder Displacement	70.6 cm³
Weight (excl. cutting equipment)	6.5 kg
Fuel Tank Volume	0.77 liters
Oil Tank Volume	0.42 liters
Engine Displacement	70.6 cm³
Power Output	3.7 kW
Weight (without cutting equipment)	6.5 kg
Chain pitch	3/8"
Bar Length (min-max)	40-70 cm
Recommended bar length	40-70 cm
Chain gauge	0.058 in
Bar length range	40-70 cm

Summary

Operator's Manual

Key to Symbols

Symbols on the Machine

Symbols found on the chainsaw for identification and safety warnings.

Symbols in the Operator's Manual

Explanations of symbols used throughout the manual for instructions and cautions.

Introduction

Welcome Message

A welcome message from Husqvarna, detailing product history and commitment to quality.

What is What?

Chainsaw Parts Diagram

An illustrated guide labeling all major parts of the Husqvarna chainsaw.

Key Component Definitions

Definitions for each numbered component shown in the chainsaw parts diagram.

General Safety Precautions

Pre-Operation Safety Checks

Essential checks before operating the chainsaw for the first time.

Critical Safety Warnings

Important warnings covering modifications, PPE, and proper maintenance.

Personal Protective Equipment (PPE)

Details essential protective gear required for safe chainsaw operation.

Machine Safety Features Overview

Explanation of the machine's safety features, including the chain brake.

Kickback Prevention and Chain Catcher

Guidance on preventing kickback and the role of the chain catcher.

Vibration Damping System

Description of the system designed to minimize vibration for user comfort.

Vibration Risks and Muffler Safety

Information on vibration health hazards and muffler heat and fire safety.

Cutting Equipment Maintenance

Guidelines for maintaining cutting equipment to ensure safety and performance.

Chain Tension and Kickback Reduction

Proper chain tension and kickback reduction techniques.

Guide Bar and Saw Chain Specs

Technical details for guide bars and saw chains, including pitch and gauge.

General Saw Chain Sharpening

Essential advice for sharpening cutting teeth to maintain performance and safety.

Sharpening Cutting Teeth

Detailed steps and tools for sharpening chain cutters and depth gauges.

Depth Gauge and Chain Tensioning

How to adjust the depth gauge and tension the saw chain correctly.

Importance of Chain Lubrication

Highlights the critical role of chain lubrication for safety and preventing chain snap.

Checking Chain Lubrication System

Steps to diagnose and resolve issues with the automatic chain lubrication system.

Drive Sprocket and Bearing Lubrication

Inspection and lubrication of the drive sprocket and needle bearing.

Cutting Equipment Wear Inspection

How to check the chain, rivets, links, and bar for wear.

Summary of Key Safety Practices

A recap of essential safety measures for chainsaw operation.

Chainsaw Safety Mechanisms

Chain Brake and Kickback Safety

How the chain brake functions and understanding kickback to prevent accidents.

Throttle Lockout Functionality

Explanation of the throttle lockout system to prevent accidental engagement.

Assembly and Installation

Fitting the Bar and Chain

Step-by-step instructions for attaching the guide bar and saw chain.

Spiked Bumper Installation

Guide for installing a spiked bumper, recommending service agent contact.

Fuel Handling and Mixing

Fuel Types and Mixing Ratios

Details on petrol types, two-stroke oil, and correct fuel-oil mixing ratios.

Chain Oil Recommendations

Guidance on selecting appropriate chain oil based on adhesion and temperature.

Safe Fueling Procedures

Precautions to prevent fire and explosion risks during fueling operations.

Transport and Storage Guidelines

Instructions for safely transporting and storing the chainsaw.

Starting and Stopping the Chainsaw

Pre-Start Checks and Cold Start

Essential checks before starting and steps for initiating a cold engine.

Warm Engine Starting Sequence

Specific procedures for starting the chainsaw when the engine is already warm.

Engine Stopping and Post-Start Actions

How to properly stop the engine and reset the chain brake.

Working Techniques and Pre-Use Checks

Pre-Use Inspection Checklist

A comprehensive list of checks for the chainsaw before each use.

General Working Instructions

Fundamental safety rules and advice for effective and safe chainsaw operation.

Kickback Avoidance and Safe Grip

Explains kickback causes, proper grip, and safe practices to avoid accidents.

Safe Log Cutting Practices

Provides techniques for cutting logs safely, avoiding jams and maintaining control.

Cutting Techniques and Terminology

Basic Cutting Technique Principles

Covers cutting principles, full throttle use, and pull/push strokes.

Understanding Cutting Terms

Definitions of key terms like cutting, limbing, and splitting.

Log Cutting Risks and Limbing

Addresses risks in log cutting, including jamming and splitting, and techniques for limbing.

Felling Techniques and Safety

Log Support and Felling Direction

Cutting methods based on log support and factors influencing felling direction.

Tree Felling Safety and Prep

Essential safety distances and preparation steps for felling trees.

Felling and Directional Cuts

Details the precise cuts required for controlling the felling direction of a tree.

Tree Felling Hazard Management

Freeing Trapped Trees and Tensioned Loads

Methods for safely freeing trapped trees and managing branches under tension.

Kickback Prevention and Cutting Methods

Understanding and Preventing Kickback

Defines kickback and provides critical advice on prevention.

Limbing and Trunk Cutting Methods

Specific techniques for limbing and cutting logs, emphasizing safe positioning.

Maintenance and Carburetor

General Maintenance Tasks

User-serviceable maintenance tasks for general upkeep.

Safety Equipment Servicing

Instructions for checking and maintaining critical safety components.

Brake and Throttle Lockout Checks

Procedures for verifying the correct operation of the inertia brake and throttle lockout.

Component Checks and Safety Systems

Checking Safety Features and Components

Guides on inspecting chain catcher, guards, dampers, switches, and muffler.

Starter Assembly and Air Filter Maintenance

Starter Assembly and Recoil Spring

Instructions for assembling the starter and tensioning the recoil spring.

Air Filter Cleaning and Importance

Explains the importance of cleaning the air filter to prevent engine issues.

Cooling System and Winter Operation

Cooling System Maintenance

Guidance on cleaning and maintaining the cooling system for efficient operation.

Adapting for Cold Weather Use

Information on potential issues and solutions for operating in cold conditions.

Heated Handles and Carburetor Heating

Explains the operation and benefits of heated handles and electrically heated carburetors.

Troubleshooting Engine Issues

Resolving Starting Failures

Identifies common causes and solutions for engine starting problems.

Addressing Engine Running Problems

Addresses issues where the engine starts but fails to run continuously.

Scheduled Maintenance Program

Daily Maintenance Checks

Routine checks performed daily before operating the chainsaw.

Weekly Maintenance Tasks

Tasks performed weekly for proper functioning and longevity.

Monthly Maintenance Tasks

Periodic checks done monthly for optimal performance.

Technical Specifications Overview

Engine and Fuel Specifications

Detailed specifications for the engine, fuel tank, oil pump, and lubrication system.

Noise and Vibration Data

Presents measured noise emissions and equivalent vibration levels.

Chain and Bar Specification Details

Technical details for guide bars and saw chains, including pitch and gauge.

Recommended Cutting Equipment

Lists compatible guide bar and saw chain combinations for safety and performance.

Filing Equipment and Angles

Information on using a file gauge for correct filing angles and chain sharpness.

Regulatory Compliance Information

EC Declaration of Conformity

Confirms compliance with relevant EU directives and applied standards.