Husqvarna 50 User Manual

Operator’s Manual
Read these instructions carefully and make sure
you understand them before using the 50.
50

Husqvarna 50 Specifications

General

Power output	2.2 kW (3.0 hp)
Weight	5.1 kg (without cutting equipment)
Chain pitch	3/8 inch
Fuel tank capacity	0.5 litre
Chain gauge	0.050"
Recommended bar length	35-40 cm (14-16 inches)
Bar length	35-40 cm (14-16 inches)

Summary

Personal Safety Equipment for Saw Operation

Understanding Safety Definitions

Key Safety Hazards of the Saw

General Safety Warnings and Precautions

Personal Safety Guidelines

Essential safety practices for the operator's personal protection.

Work Area Safety Requirements

Rules for maintaining a safe and hazard-free work environment.

Saw Operation Safety

Specific safety precautions for operating the cutting saw.

Blade Safety Instructions

Critical safety measures when handling and using saw blades.

Husqvarna Excel Series Diamond Blades

Blade and Skid Plate Installation Procedure

Step 1: Blade Removal and Inspection

Step 2: Blade and Flange Mounting

Step 3: Skid Plate Installation

Step 4: Final Checks and Skid Plate Replacement

Identifying Saw Components

Operating the 50 Handheld Saw

Husqvarna ProEdge Series Blades

Using the ProEdge Series Blades

Routine Saw Maintenance

Guards Inspection

Diamond Blade Inspection

Skid Plate Inspection

Saw Controls Check

Maximizing the Soff-Cut System Performance

Sawing Contraction Joints Properly

Troubleshooting Saw Issues

Saw Spalling and Ravelling Cut

Diagnosing and fixing issues causing spalling or ravelling cuts.

Electric Motor Not Starting

Troubleshooting steps for when the electric motor fails to start.

Technical Specifications of the 50 Handheld Saw