Need help?Do you have a question about the Husqvarna 560XPG and is the answer not in the manual?
General| Engine Power | 3.5 kW |
|---|---|
| Cylinder Displacement | 59.8 cm³ |
| Fuel Tank Volume | 0.65 L |
| Chain Pitch | 3/8" |
| Chain Gauge | 0.058" |
| Heated Handle | Yes |
Crucial safety instructions for chain saw repair and operation.
Specific safety warnings and precautions for operating the chain saw.
Provides detailed specifications for the chain saw components.
Step-by-step guide to removing the starter assembly.
Instructions for replacing a damaged starter cord.
Steps for assembling the starter unit.
Instructions for removing the ignition module and flywheel.
Steps for reassembling the ignition module and flywheel.
Details on the carburettor's design, function, and operation.
Procedure for pressure testing the carburettor.
Guidance for diagnosing and resolving common chain saw faults.
Procedure to troubleshoot the rear handle heating element.
Procedure to troubleshoot the front handle heating element.
Procedure to troubleshoot the generator.
Procedure to troubleshoot carburettor heating element and thermostat.
Procedure for pressure testing the cylinder.
Lists potential faults and causes related to starting the chain saw.
Lists potential faults and causes for fuel leaks from the carburettor.
Lists potential faults and causes for engine flooding.
Lists potential faults and causes for idling issues.
Lists potential faults and causes for overly rich idling.
Lists potential faults and causes for uneven idling.
Lists potential faults and causes related to high speed operation.
Lists potential faults and causes for not running at full throttle.
Lists common troubleshooting methods and procedures.
To Next Page
