English - 57
Repair Instructions
7.53 Repairing damaged threads
If threads on the chainsaw are worn, the reparation
kit, 503 27 33-01, is available.
First drill with:
6.1 mm drill for the magnesium crankcase
Then screw in the thread plug using a suitable
screw and wrench. See figure 84.
This type of screw plug is ideal for plastic and
magnesium but cannot be used to repair threads in
aluminium. There is another type of thread plug and
metric screw available for this purpose. See figure
84. Check the manufacturer’s manual for thread
information.
Fig 84
To Next Page
Loading...
