Husqvarna 536LiPX User Manual

EE
EE
nn
nn
gg
gg
ll
ll
ii
ii
ss
ss
hh
hh
536LiPX
Operator ′ s manual
Please read the operator’s manual carefully and make sure you understand the instructions
before using the machine.

Husqvarna 536LiPX Specifications

General

Product Type	Chainsaw
Battery Voltage	36 V
Bar Length	35 cm
Chain Speed	20 m/s
Chain Pitch	0.325 inches
Chain Gauge	1.3 mm
Oil Tank Volume	0.2 l
Sound Power Level	103 dB(A)
Power source	Battery
Recommended Bar Length	35 cm
Vibration Level	3.5 m/s² (front handle), 4.5 m/s² (rear handle)
Vibration level (front/rear handle)	3.5 m/s² (front handle), 4.5 m/s² (rear handle)

Summary

Key to Symbols

Symbols on the Machine

Explains symbols indicating safety, operation, and warnings found directly on the machine itself.

Symbols on Battery and Charger

Details symbols related to the battery and charger, including recycling, indoor use, and double insulation.

Other Symbols and Manual Symbols

Covers additional symbols for market certifications and symbols used within the operator's manual for instructions.

Introduction

What is What?

Machine Component Identification

Identifies all key parts of the Husqvarna 536LiPX using a diagram and numbered list for user reference.

General Safety Precautions

General Power Tool Safety Warnings

Provides critical safety warnings for all power tools, emphasizing manual reading and correct usage.

Work Area and Personal Safety

Covers safe work area practices and personal safety measures, including awareness and PPE.

Power Tool Use and Care

Details best practices for safe power tool operation, maintenance, and storage to prevent accidents.

Battery Tool Use and Care

Specific safety guidelines for battery-powered tools, focusing on charging, handling, and preventing hazards.

Brush Chainsaw Safety and Kickback Prevention

Safety advice for brush chainsaws, including handling, grip, and preventing kickback for operator safety.

Personal Protective Equipment (PPE)

Outlines essential PPE requirements such as helmets, hearing protection, and eye protection for safe operation.

Battery and Charger Safety

Crucial safety precautions for battery and charger handling, charging, and storage to prevent electrical hazards.

Protective Clothing and Accessories

Advises on wearing appropriate clothing, gloves, boots, and keeping a first aid kit for safety.

Battery Safety Guidelines

Critical safety rules for handling, charging, and storing batteries to prevent explosion, fire, or chemical burns.

Battery Charger Safety

Safety instructions for battery chargers, covering electrical shock, short circuits, and proper usage to prevent fire.

Machine Safety Equipment and Control Panel

Explains the machine's safety features, their function, and the control panel indicators for operation.

Power Trigger Lockout and Harness Release

Details the power trigger lockout for preventing accidental starts and the harness quick-release mechanism for emergencies.

Cutting Attachment Guards and Maintenance

Emphasizes using approved guards and maintaining cutting equipment for safety and longevity.

Chain Maintenance and Lubrication

Covers raker clearance, chain tensioning, and lubrication importance for preventing accidents and wear.

Bar and Chain Specifications

Guides on selecting and fitting the correct replacement guide bars and saw chains.

Saw Chain Specifications and Sharpening

Defines saw chain parameters and provides guidance on sharpening cutting teeth to reduce kickback.

General Cutting Teeth Sharpening Advice

Offers general tips for sharpening cutting teeth to ensure optimal performance and safety.

Sharpening Cutting Teeth Procedure

Step-by-step instructions for sharpening cutting teeth using files and gauges for optimal cutting.

Setting Raker Clearance

Details how to set the raker clearance correctly, crucial for cutting performance and safety.

Chain Tensioning and Lubrication

Instructions for tensioning the chain and the importance of proper lubrication to prevent snapping and damage.

Chain Oil and Filling

Discusses suitable chain oil and provides instructions on when and how to refill the oil reservoir.

Chain Lubrication Checks and Troubleshooting

Guides on checking chain lubrication and troubleshooting issues when it does not work correctly.

Cutting Equipment Wear Checks

Instructions for checking wear on the saw chain, drive sprocket, and guide bar for maintenance.

Assembly

Fitting the Loop Handle

Instructions for attaching and securing the loop handle to the machine's shaft for comfortable operation.

Fitting the Bar and Chain

Step-by-step guide to correctly fit the guide bar and saw chain onto the machine for operation.

Rotating the Saw Head

Details the procedure for rotating the saw head to the desired angle and securely fastening it.

Assembling Branch Hook and Shock Guard

Instructions for assembling the branch hook and for dismantling/reassembling the shock guard.

Harness Assembly and Adjustment

Guides on assembling the harness to the backpack battery and adjusting it for proper fit and support.

Harness Adjustment and Fitting

Instructions on adjusting the harness for optimal balance and securing the elastic cord for correct fit.

Battery Handling

Battery Status and LED Indicators

Explains the LED lights on the battery and their meaning regarding charge level and potential errors.

Connecting Battery and Charger

Details the process of connecting the battery to the charger and the charger to the power outlet.

Charging Process and Status

Information on how lithium-ion batteries charge, including cancellation and charging levels.

Battery LED Display and Transport/Storage

Further details on LED displays and guidelines for safe transport and storage of batteries and chargers.

Disposal of Battery, Charger, and Machine

Information on the proper disposal and recycling of the product, battery, and charger according to environmental regulations.

Starting and Stopping

Pre-Start Checks

Essential checks to perform on the machine before starting, ensuring safety and readiness.

Connecting and Starting the Machine

Procedures for connecting the battery and safely starting the machine using the power trigger.

Stopping and Battery Removal

Steps for safely stopping the machine and removing the battery to prevent accidental starts.

Working Techniques

General Working Instructions and SavE Mode

Basic instructions for operating the machine and utilizing the energy-saving SavE mode for extended runtime.

Basic Safety Rules for Operation

Fundamental safety rules covering awareness, working conditions, and physical readiness for safe operation.

Safe Working Position and Forestry Clearing

Guidance on maintaining balance, working position, and systematic approach for forestry clearing tasks.

Safety Zone and Tree Felling Technique

Rules for maintaining a safety zone and specific techniques for safe tree felling operations.

Stem Limbing and Overhead Line Safety

Techniques for safe stem limbing and critical safety precautions when working near overhead power lines.

Cutting Branches Safely

Methods for cutting branches, including proper cuts, support, and handling large sections to prevent injury.

Maintenance

Inspection and Gear Replacement

Covers general machine inspection and the procedure for changing the chain drive gear.

Cleaning Procedures

Details on cleaning the machine, battery, and charger, including terminal cleaning.

Troubleshooting Schedule

A comprehensive table listing possible faults, their causes, and actions for the machine, battery, and charger.

Maintenance Schedule

A detailed schedule outlining daily, weekly, and monthly maintenance tasks to keep the machine in optimal condition.

Technical Data

Motor, Weight, and Battery Runtime

Specifications for the motor, machine weight, and battery runtime, including SavE mode performance.

Noise, Vibration, and Charger Specs

Details noise/vibration levels and specifications for approved battery chargers and batteries.

Guide Bar and Saw Chain Compatibility

Lists approved guide bar and saw chain combinations for the Husqvarna 536LiPX model.

Saw Chain Filing and EC Declaration

Visual guide for saw chain filing and the EC Declaration of Conformity with relevant EU directives.