EasyManua.ls Logo

Husqvarna 592 XP - User Manual

Husqvarna 592 XP
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
585, 592 XP
®
, 592 XP
®
G
EN Operator's manual 2-38

Table of Contents

Questions and Answers

  • J
    Joel MasonJul 30, 2025
    Why does my Husqvarna Chainsaw engine not start?
    • M
      Mr. James ParkJul 30, 2025
      If your Husqvarna Chainsaw engine won't start, several issues could be the cause. It could be due to incorrect fuel type, in which case you should drain the fuel tank and refill with the correct fuel. Another reason could be a dirty or wet spark plug, so ensure the spark plug is dry and clean. Also, check if the spark plug is loose and tighten it if necessary. If the engine is flooded due to repeated starts with full choke after ignition, remove and clean the spark plug, lay the chainsaw on its side with the spark plug hole facing away from you, and pull the starter rope handle 6-8 times before reassembling the spark plug and attempting to start the product.
  • L
    Lauren Ryan MDAug 5, 2025
    What to do if my Husqvarna 592 XP Chainsaw engine starts but stops immediately?
    • J
      janet45Aug 6, 2025
      If your Husqvarna Chainsaw starts but then stops, it might be due to incorrect fuel. Drain the fuel tank and refill it with the correct fuel. You may also need to clean or replace the air filter. Another potential solution is to replace the fuel filter.
  • S
    Seth RojasAug 13, 2025
    How to fix a Husqvarna 592 XP when the engine does not start because of blocked starter pawls?
    • D
      Donald DrakeAug 13, 2025
      If your Husqvarna chainsaw engine won't start, the starter pawls might be blocked. Try adjusting or replacing the starter pawls. Also, try cleaning around the pawls.
  • K
    Katherine GuzmanAug 20, 2025
    What to do if my Husqvarna 592 XP has chain oil in the fuel tank and won't start?
    • D
      David MaciasAug 20, 2025
      If your Husqvarna Chainsaw engine does not start and the fuel tank is filled with chain oil, drain the fuel tank if you have not tried to start the product.

Summary

Safety

General Safety Instructions

Outlines fundamental safety rules and precautions for operating the chainsaw safely.

Safety Instructions for Operation

Provides specific safety guidelines to follow during the operation of the chainsaw.

Safety Instructions for the Cutting Equipment

Highlights safety precautions specifically related to the chainsaw's cutting components.

Personal Protective Equipment

Details the essential protective gear required for safe chainsaw operation.

Safety Devices on the Product

Explains the function and importance of safety features integrated into the chainsaw.

Chain Brake and Front Hand Guard

Describes the chain brake mechanism and its engagement via the front hand guard.

Throttle Trigger Lockout

Explains the function of the throttle trigger lockout to prevent accidental acceleration.

Start;Stop Switch

Fuel Safety

To Mix Fuel

To Fill the Fuel Tank

Assembly

Assembling the Guide Bar and Saw Chain

Operation

Function Check Before Use

Outlines a mandatory check of the chainsaw's functions before starting operation.

Pull Stroke and Push Stroke Cutting

Cutting Techniques

Limbing Technique

Kickback Information

Causes and Prevention

Details the circumstances leading to kickback and how to avoid it.

Common Questions About Kickback

To Start the Product

Provides detailed instructions for safely starting the chainsaw engine.

Tree Felling Technique

Keeping a Safe Distance

Emphasizes maintaining a safe distance from the felling area for personnel safety.

Calculating the Felling Direction

Explains how to assess and determine the safest direction for felling a tree.

The Felling Hinge

Details the importance and creation of the felling hinge for directional control.

Making Directional Cuts

Instructions for making precise cuts to guide the tree's fall direction.

Safe Corner Method

Maintenance

Maintenance Schedule

A detailed schedule outlining daily, weekly, and monthly maintenance tasks.

Checks of Safety Devices

Brake Band Check

Front Hand Guard and Chain Brake Activation Check

Throttle Trigger and Lockout Check

Chain Brake Check

Chain Catcher Check

Right Hand Guard Check

Vibration Damping System Check

Start;Stop Switch Check

Muffler Check

Carburetor Adjustment

Adjusting Low Speed Needle (L)

Adjusting Idle Speed Screw (T)

Adjusting High Speed Needle (H)

Examining Carburetor Adjustment

Replacing Starter Rope

Cleaning the Air Filter

Instructions for cleaning the air filter to maintain engine performance and longevity.

Sharpening the Saw Chain

Sharpening the Cutters

Detailed instructions on how to properly sharpen the saw chain cutters using files.

Adjusting Saw Chain Tension

Checking Saw Chain Lubrication

Examining Cutting Equipment

Checking the Guide Bar

Maintaining Fuel and Chain Oil Tanks

Adjusting Chain Oil Flow

Troubleshooting

Engine Does Not Start

Identifies potential causes and actions for when the engine fails to start.

Engine Starts But Stops Again

Addresses issues where the engine starts but then shuts off unexpectedly.

Transportation and Storage

Husqvarna 592 XP Specifications

General IconGeneral
Engine Power5.6 kW
Cylinder Displacement92.7 cm³
Maximum Power Speed9600 rpm
Idling Speed2800 rpm
Weight (excl. cutting equipment)7.4 kg
Chain Pitch3/8"
Chain Gauge0.058"
Sound Pressure Level112 dB(A)
Sound Power Level119 dB(A)
Recommended Bar Length18-36 inches

Related product manuals