To Next Page
H
Heidi AndrewsAug 9, 2025
How to fix a clogged air filter in Husqvarna 550 XP Mark II Chainsaw?
- JJose GreerAug 9, 2025
If your Husqvarna Chainsaw's air filter is clogged, clean or replace it.
How to fix a clogged air filter in Husqvarna 550 XP Mark II Chainsaw?
If your Husqvarna Chainsaw's air filter is clogged, clean or replace it.
What to do if Husqvarna Chainsaw engine is flooded?
If your Husqvarna Chainsaw engine is flooded due to repeated starts with full choke, remove and clean the spark plug. Then, put the chainsaw on its side with the spark plug hole facing away from you, and pull the starter rope handle 6-8 times. Finally, reassemble the spark plug and start the chainsaw.
What to do if I used the wrong fuel type in my Husqvarna Chainsaw?
If you've used the wrong type of fuel in your Husqvarna Chainsaw, drain the fuel tank and refill it with the correct fuel.
How to fix a clogged fuel filter in Husqvarna 550 XP Mark II?
If the fuel filter in your Husqvarna Chainsaw is clogged, replace it.
How to tighten a loose spark plug on a Husqvarna Chainsaw?
If the spark plug and cylinder are loose on your Husqvarna Chainsaw, tighten the spark plug.
General| Cylinder Displacement | 50.1 cm³ |
|---|---|
| Maximum Power Speed | 10200 rpm |
| Fuel Tank Volume | 0.53 l |
| Oil Tank Volume | 0.32 l |
| Chain Pitch | 0.325 inch |
| Recommended Bar Length | 13-20 in |
| Chain Gauge | 0.050 in |
| Engine Power | 3.0 kW |
| Power Output | 3.0 kW |
| Weight (without cutting equipment) | 5.0 kg |
Warning: Product can cause serious injury or death. Read manual.
Important safety guidelines for using the chainsaw correctly and safely.
Precautions to take before and during chainsaw operation.
Avoid kickback by understanding its causes and proper techniques.
The chain brake stops the saw chain during kickback.
Ensure ventilation, avoid sparks/flames, and be aware of flammability risks.
Keep teeth sharp, correct depth gauge, and proper tension.
Verify chain brake, guards, switches, and chain tension are correct.
Guidelines for mixing gasoline and two-stroke oil for the engine.
Steps for safely filling the fuel tank with the correct fuel mixture.
A kickback can cause serious injury or death. Know causes and prevention.
Understanding kickback, chain brake effectiveness, and prevention.
Engage chain brake, set choke, and use air purge bulb.
Engage chain brake and set start throttle setting.
Steps for safely starting the engine with two hands.
Requires experience; consider training for safe tree felling.
Examine tree tilt, wind, obstacles, and damage for safe felling.
Use directional cuts and safe corner method for controlled felling.
Crucial for controlling felling direction; must be correct thickness.
Creating angled cuts to guide the tree's fall.
Technique for making a safe corner cut for controlled felling.
Dangerous procedure; keep out of risk zone and do not fell trapped trees.
Safely release tension in branches before cutting.
Methods for cutting wood under tension, with safety warnings.
Table outlining daily, weekly, and monthly maintenance tasks.
Using a file and gauge to sharpen cutting teeth correctly.
Adjusting depth gauge for optimal cutting performance and kickback reduction.
Procedure to ensure correct chain tension to prevent derailment.
Diagnosing and fixing issues like blocked starter pawls or fuel problems.
Troubleshooting fuel, carburetor, and filter issues.
List of evaluated and recommended guide bars and saw chains.
