EasyManua.ls Logo

Husqvarna 536LiP4 - User Manual

Husqvarna 536LiP4
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Workshop Manual
English
536LiP4 / 536LiPT5
536LiPX

Table of Contents

Questions and Answers

  • A
    Angelica HolderAug 10, 2025
    What to do if the Error LED flashes on my Husqvarna 536LiP4?
    • J
      Jennifer EscobarAug 11, 2025
      If the Error LED flashes on your Husqvarna Chainsaw, it might be because: * The power trigger and the activate button are pressed simultaneously. To resolve this, release the power trigger, which should activate the machine. * The chainsaw is overloaded. If this is the case, remove the battery and release the chain. * There is a temperature deviation. Allow the machine to cool down.
  • E
    ernesthernandezAug 16, 2025
    Why is the green activate LED flashing on my Husqvarna 536LiP4?
    • L
      Leonard AdamsAug 16, 2025
      If the green activate LED is flashing on your Husqvarna Chainsaw, it indicates low battery voltage. Charge the battery to resolve this issue.
  • S
    Scott RiosAug 22, 2025
    What does it mean when the Error LED is flashing on my Husqvarna 536LiP4 charger?
    • S
      Sabrina FowlerAug 22, 2025
      If the Error LED is flashing on your Husqvarna Chainsaw's battery charger, it could be caused by a temperature deviation. Ensure that you use the battery charger only when the surrounding temperature is between 5 °C (41 °F) and 40 °C (104 °F). If the issue persists, contact your service agent.
  • K
    Kevin SmithAug 29, 2025
    What to do if the Error LED is flashing on my Husqvarna Chainsaw?
    • V
      Victoria MitchellAug 29, 2025
      If the Error LED on your Husqvarna Chainsaw flashes, it could be due to several reasons: * The battery might be discharged, in which case you should charge it. * There could be a temperature deviation; ensure you're using the battery in temperatures between -10 °C and 40 °C. * It's possible there's an over voltage issue; check that the mains voltage matches what's stated on the machine's rating plate. * As a precaution, you can remove the battery from the battery charger.
  • J
    Joshua CurtisSep 3, 2025
    What to do if Error LED flashes on Husqvarna 536LiP4?
    • R
      Robert MaciasSep 3, 2025
      If the Error LED on your Husqvarna Chainsaw is flashing, it could be because the power trigger and the activate button are pressed simultaneously. To resolve this, release the power trigger, which should activate the machine. Another cause might be overload. If this is the case, remove the battery and release the chain. Lastly, temperature deviation can also cause this issue. Allow the machine to cool down.

Husqvarna 536LiP4 Specifications

General IconGeneral
BrandHusqvarna
Model536LiP4
CategoryChainsaw
LanguageEnglish

Related product manuals