Husqvarna 536LiPX Workshop Manual

Husqvarna 536LiPX

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Workshop Manual

English

536LiP4 / 536LiPT5

536LiPX

Table of Contents

Other manuals for Husqvarna 536LiPX

Operator's Manual32 pages

Questions and Answers:

S
Sara FergusonAug 5, 2025
What to do if the Error LED flashes on my Husqvarna 536LiPX?
- C
  Christian RoweAug 5, 2025
  If the Error LED flashes on your Husqvarna Chainsaw, it might be because: * The power trigger and the activate button are pressed simultaneously. To resolve this, release the power trigger, which should activate the machine. * The chainsaw is overloaded. If this is the case, remove the battery and release the chain. * There is a temperature deviation. Allow the machine to cool down.
B
bwalshAug 11, 2025
Why is the green activate LED flashing on my Husqvarna Chainsaw?
- D
  Dr. James Walton Jr.Aug 11, 2025
  If the green activate LED is flashing on your Husqvarna Chainsaw, it indicates low battery voltage. Charge the battery to resolve this issue.
R
rachaelwilliamsAug 16, 2025
What does it mean when the Error LED is flashing on my Husqvarna Chainsaw charger?
- H
  Heather LambertAug 17, 2025
  If the Error LED is flashing on your Husqvarna Chainsaw's battery charger, it could be caused by a temperature deviation. Ensure that you use the battery charger only when the surrounding temperature is between 5 °C (41 °F) and 40 °C (104 °F). If the issue persists, contact your service agent.
A
Angela FlemingAug 23, 2025
What to do if the Error LED is flashing on my Husqvarna Chainsaw?
- J
  Justin CarpenterAug 23, 2025
  If the Error LED on your Husqvarna Chainsaw flashes, it could be due to several reasons: * The battery might be discharged, in which case you should charge it. * There could be a temperature deviation; ensure you're using the battery in temperatures between -10 °C and 40 °C. * It's possible there's an over voltage issue; check that the mains voltage matches what's stated on the machine's rating plate. * As a precaution, you can remove the battery from the battery charger.
W
williamcampbellAug 29, 2025
What to do if Error LED flashes on Husqvarna Chainsaw?
- W
  William McguireAug 29, 2025
  If the Error LED on your Husqvarna Chainsaw is flashing, it could be because the power trigger and the activate button are pressed simultaneously. To resolve this, release the power trigger, which should activate the machine. Another cause might be overload. If this is the case, remove the battery and release the chain. Lastly, temperature deviation can also cause this issue. Allow the machine to cool down.

Husqvarna 536LiPX Specifications

General

Product Type	Chainsaw
Battery Voltage	36 V
Bar Length	35 cm
Chain Speed	20 m/s
Chain Pitch	0.325 inches
Chain Gauge	1.3 mm
Oil Tank Volume	0.2 l
Sound Power Level	103 dB(A)
Power source	Battery
Recommended Bar Length	35 cm
Vibration Level	3.5 m/s² (front handle), 4.5 m/s² (rear handle)
Vibration level (front/rear handle)	3.5 m/s² (front handle), 4.5 m/s² (rear handle)

Related product manuals

Preview: Husqvarna 536LiP4

Husqvarna 536LiP4

Husqvarna 535i XP

Preview: Husqvarna 55

Preview: Husqvarna 50

Preview: Husqvarna 51

Preview: Husqvarna 545

Preview: Husqvarna 555

Preview: Husqvarna 570

Husqvarna 562XP

Husqvarna 572XP

Preview: Husqvarna 543 XP

Husqvarna 543 XP

Husqvarna 550 XP