46 Instruction book Lily 555/545
Sewing
10. Select REP and sew the ball.
11. Return to the memory contain-
ing the programmed leaf.
12. Select REP and sewthe fl ower
petal from ball to top. Stop with
the needle in the material.
13. Change to straight stitch, stitch
length 1,5.
14. Sew back close to the petal.
15. Sew the rest of the petals in the
same way.
Also: Consult Quick info for Picto-
gram steps.
2. Select NORM and reinforced
straight stitch .
3. Sew the stem down to the fi rst
pair of leaves.
4. Select REP and sew a leaf from
the stem to the top.
5. Select straight stitch, stitch length
1,5. Sew from the top of the leaf
and back to the stem.
6. Sew the other leaf in the same
way.
7. Select reinforced straight stitch
and continue sew the stem down
to the fl ower stem.
8. Then sew the stem as far as to the
fl ower.
9. Program the ball in an empty
memory.
Read about Programming on page
23. Use presser foot B.
1. Program the leaf in an empty
memory.
Pictogram - Model 555
To Next Page
Loading...
